Hammerhead By Polaris

(01) RUBBER KNOB

RUBBER KNOW SEE DIAGRAM

(17) Hammerhead Brake Pads Rear for 150cc

Used on American SportWorks Fun Kart Model 7150 also used on older-style 200 Series LUTV's   PARTS#SHammerhead Off-Road Part # 7.020.022American SportWorks Part # 14183Metal Motorsports part #...

(16) Hammerhead Front for 150cc / 250cc / 300cc & Rear Brake Pads for Mudhead 208R

Brake pads that are used on most hammerhead 150cc and 250cc models. Also used on ASW 7150, LandMaster 200 and R-150.  These brake pads are also used as the rear brake pads on the Mudhead and...

(15) Hammerhead M8x12 Allen Bolt

m8 x 1.25 x 12 allen bolt Size: M8 (Metric 8mm diameter) Length: 12mm Thread Pitch: 1.25mm Type: Allen Head Price is per bolt Bolt for brake caliper   PART#SHammerhead part # 9.908...

(14) Hammerhead M8x100 Hex Bolt for 150cc Rear Brake Caliper

Bolt most commonly used to hold 150cc rear brake caliper Size: M8 (Metric 8mm diameter) Length: 100mm Thread Pitch: 1.25mm Type: Hex Washer Head Price is per bolt PART#S Hammerhead part # 9...

(12) Hammerhead Brake Caliper Rear for 150cc

Caliper comes loaded with brake pads and parking brake armWorks on nearly all 150cc karts, as well as the 150cc UTV by Hammerhead and the 150cc UTV by American SportWorks /...

(11) Hammerhead Brake Caliper, Driver (Left) Front for 150cc / 250cc / 300cc, Rear for Mudhead 208R and Mid-Size Gokarts

Driver side brake caliper comes loaded with brake padsThis caliper is also used as rear brake caliper for the 80T and MudHead and Trailmaster Mid XRXWorks on most 150s and...

(10) Hammerhead Hydraulic Brake Hose / Brake Line 75", Rear for 150cc / 208R

75" Rear Brake hose assembly for the rear brakes for most Hammerhead 150cc karts.  Works for most 150cc gokarts out there.Brake hose assembly for 80T / Brake hose assembly for Mudhead / Brake...

(09) Hammerhead Hydraulic Brake Hose / Brake Line 34", Left (Driver) for 150cc / 250cc / 300cc

34" Brake Hose used on almost all 150cc and 250cc Hammerhead go karts.  Front brake line 34" long   Part#s Hammerhead Part # 6.000.089Carter Brothers Part # 625-0015American SportWorks...

(08) Hammerhead Brake Caliper Passenger (Right) Front for 150cc / 250cc / 300cc

Caliper comes loaded with brake padsWorks on most 150cc and 250cc Hammerhead vehiclesMounting bolts are 2 1/2" center to center. Does not come with banjo bolt and washers Hammerhead Part # 6.000...

(06) Hammerhead M8x14 Allen Head Bolt for Brake Caliper

M8 x 1.25 x 14 allen head bolt / Bolt - Bolt Strap M8*14Allen bolt that is used to hold front brake caliper on to strut. Size: M8 (Metric 8mm diameter) Length: 14mm Thread Pitch: 1.25mm Type: Allen...

(05) Hammerhead Hydraulic Brake Hose / Brake Line 43", Right (Passenger) for 150cc / 250cc / 300cc

43" Brake Hose used on almost all 150cc and 250cc Hammerhead go karts

(04) Hammerhead Copper Crush Washer for Brakes

Copper Crush WasherHammerhead part # 13-1422-00

(03) Hammerhead Bolt, M10x24 Fine-Thread Banjo Bolt

m10 x 24 Fine Thread Banjo Bolt, Banjo Brake Bolt Size: M10 (Metric 10mm diameter) Length: 24mm Thread Pitch: 1.25mm Type: Hex Washer Head Price is per bolt BOLT-BANJO,M10X1.25 Hammerhead part # 9...

(02) Hammerhead Brake Light Switch, Brake Lamp Switch for 150cc / 250cc / 300cc

Brake light switch assembly for nearly all 150cc and 250cc / 300cc Hammerhead and Trailmaster vehicles.  If your vehicle uses brake master cyclinder (part # 6.000.076) then your vehicle uses...

(01) Hammerhead Brake Master Cylinder for 150cc / 250cc / 300cc

Brake Master Cylinder for both 150cc and 250cc Hammerhead units.  This dual piston master cylinder has been used on the Hammerhead line of karts since 2005.  Works on all of the Hammerhead...

(20) Hammerhead Brake Pedal for 150cc / 250cc / 300cc

Brake Pedal for nearly all Hammerhead 150s and 250s.  Should work for most karts out there.  May come in either black or silver.Hammerhead part # 4.000.015 Carter Bros part # 552...

(18) Hammerhead M6x24 Spindle Pin / Brake Block Pin

F6 * 24 Pin that connects spindle pin bracket (part # 8.030.024) to brake pedalHammerhead part # 9.700.624American Landmaster part # 14116Carter Brothers part # 500-1042Polaris part # H7660004

(15) Hammerhead Brake Pedal Rubber, Black Pad for 150cc / 250cc / 300cc

Brake Pedal pad for nearly all Hammerhead 150s and 250s.  Should work for most karts out there.  This goes over the brake pedal itself, part # 4.000.015Hammerhead part # 7.020...

(13) Hammerhead M8x222 Brake Pedal Bolt

m8x1.25x222 Bolt Size: M8 (Metric 10mm diameter) Length: 222mm Thread Pitch: 1.25mm Type: Brake Pedal Price is per bolt Hammerhead part # 9.708.222Polaris part # 205043007Carter Brothers part...

(12) Hammerhead Spring, Brake Return Spring for 150cc / 250cc / 300cc

150cc Brake Pedal Return Spring / 250cc Brake Pedal Return SpringWorks for nearly all Hammerhead 150-250cc vehicles and Trailmaster 150cc - 300cc vehiclesHammerhad part # 8.040.007Carter Brothers...

(08) Hammerhead M2x12 Cotter Pin 2 x 12

2 x 12 Cotter Pin for Pin, Figure 17-38Hammerhead part # 9.500.212Carter Bros GSR, GSX 150 part # 500-1003Tomberlin Crossfire Part # 1010647Trailmaster Part # 9.500.212

(07) Hammerhead Bracket, Spindle Pin Bracket / T-Block

T bracket that connects the spindle pins (8.010.081) to brake pedal.  T Block, Brake CAST-COUPLER,BRAKE,PUSH RODHammerhead part # 8.030.024American Sportworks part # 14101Trailmaster Part # 8...

(04) Hammerhead Nut, M8 Non-Locking Nut

M8 Nut that works with spindle pin (part # 8.010.081)Hammerhead part # 9.200.008Polaris part # 7547076

(03) Hammerhead Pin, Spindle Pin

Spindle pin that compresses master cylinder plunger Type: Pin/bolt Size: ~50mm length, M8 diameter. Price is per item 14117, pushrod, brake adjust Hammerhead part # 8.010.081American Landmaster...

(02) Hammerhead Bolt, M8x35 Flange Bolt

M8 x 1.25 x 35 Bolt that holds brake brake master cylinder to frame (part # 6.000.076) Size: M8 (Metric 8mm diameter) Length: 35mm Thread Pitch: 1.25mm Type: Hex Washer Head Price is per bolt

(01) Hammerhead Bracket, Master Cylinder Protector for 150cc / 250cc / 300cc

Master Cyclinder protection bracket that will help protect the master cylinder on your gokart.Hammerhead part # 8.070.044Polaris part # 303044022

(13) Hammerhead Nut M5

SEE PARTS DIAGRAM LINK

(12) Hammerhead Manual Choke Cable 48" for 150cc

Manual choke cable for all Hammerhead 150cc models, including R-150 UTV.  This choke cable is only installed on 2017 and newer Hammerhead 150cc models.  If you want to convert your old...

(11) Hammerhead Throttle Cable 84" for 150cc / 250cc / 300cc

 Roughly 84" long throttle cable (measuring end-to-end) used on most 150/ 250/ 300cc go-kartsThis throttle cable also works on the Hammerhead Rave 150, SS250 or GTS 250, and several other...

(10) Hammerhead Bolt, M5x15 Pan Screw

Phillips Head Bolt m5x15Hammerhead part # 9.600.515Hammerhead part # 003-050015-00

(09) Hammerhead Plate, Pedal Pad Plate

Pedal Pad PlateHammerhead part # H5260067

(08) Hammerhead Pad, Throttle Pedal Rubber, Black Pad for 150cc / 250cc / 300cc

Gas Pedal pad for nearly all Hammerhead 150s and 250s.  Should work for most karts out there.  This fits on top of the throttle pedal comp, 4.000.01614122 Pad, Throttle Pedal - BLK -...

(05) Hammerhead Spring, Throttle Pedal Return Spring for 150cc / 250cc / 300cc

M8 * 145, Throttle Pedal Bolt.  This bolt is also used in the lower a-arm of the Mudhead / Mudhead 208R. 150cc Throttle Return Spring / 250cc Throttle Return SpringThrottle Pedal Return...

(04) Hammerhead Bolt, M8 x 145 Shoulder Bolt

M8 * 145, Throttle Pedal Bolt.  This bolt is also used in the lower a-arm of the Mudhead / Mudhead 208R. Newer Mudhead / Mudhead 208R models use a different bolt, part # 9.108.145 inside a...

(03) Hammerhead Bushing, 12x21x12 Sleeve / Pedal Bushing

Pedal Bushing or Sleeve Bushing 12 x 21 x 12Hammerhead part # 7.010.004American SportWorks part #  14119Polaris part # 209038045

(02) Hammerhead Pedal, Throttle Pedal for 150cc / 250cc / 300cc

Throttle Pedal for nearly all Hammerhead 150s and 250s.  Should work for most karts out there.  May come in either black or silver. Black metal 5" x 6.75" roughly Cable bracket on right...

(14) Hammerhead Canopy Cover for GTS 150 / Platinum GTS 150

GTS 150 canopy cover / Platinum GTS 150 Canopy topGTS 150 bikini top / GTS 150 top Hammerhead Part # 13-0801-00

(13) Hammerhead Tube Seat 32, 1.25" (32mm) for 150cc / 250cc

Tube Seat 32 for rollcage bars on the 150 and 250 karts.  This is the black plastic piece with a half-moon shape on end of the rollcage bars where the bolts go in.  Please note there are a...

(11) Hammerhead Bolt, M8x50 Flange Bolt

Flange Bolt M8x1.25x55BOLT, M8 X 1.25 X 55 FHCS DAC Size: M8 (Metric 8mm diameter) Length: 55mm Thread Pitch: 1.25mm Type: Hex Washer Head Price is per bolt Hammerhead Part # 9.108.055Old TJ Power...