Hammerhead By Polaris

(03) Hammerhead Pin, Spindle Pin

Spindle pin that compresses master cylinder plunger Type: Pin/bolt Size: ~50mm length, M8 diameter. Price is per item 14117, pushrod, brake adjust Hammerhead part # 8.010.081American Landmaster...

(03) Hammerhead Piston for 150cc, GY6

Hammerhead OEM 150cc Piston, 57.4mmHammerhead part # M150-1004001American Landmaster part # 14347Trailmaster part # 157.01.301

(03) Hammerhead Rubber Plug for 12-Volt Outlet

Rubber Plug for Power Outlet in dashCar Cigarette Lighter PlugHammerhead part # 7.020.051 Polaris part # 208037027American Sportworks part # 14914

(03) Hammerhead Shaft, Starter Reduction Shaft / Rod for 150cc, GY6

Shaft Starter Reduction Gear for GY6 150ccHammerhead part # M150-1060002Baja Part # BR150S-496Baja Part # DN150-310DongFang Part # 1.20.18.01.02000Joyner Part # GY150-307-0131Carter Brothers...

(03) Hammerhead Shifter Cam Shaft for 150cc with F/N/R

Shaft, Shifter Cam for 150cc models with F/N/RHammerhead part # 14305 Trailmaster part # 157F.10.440

(03) Hammerhead Steering Wheel for 150cc and 250cc

This steering wheel is used on all Hammerhead 150cc and 250cc karts.  Used pretty much on all Chinese 150/250 gokarts.   PART#S Hammerhead Part # 7.020.038Carter Brothers part # 536-3027 /...

(03) Hammerhead Tire/Wheel Assembly 16x6x8, Front, Right (Passenger)

Mudhead Passenger Front Tire and Wheel Assembly. Front Passenger side black wheel assembly with 16x6-8 V-tread tire      Hammerhead part # 6.000.321

(03) Lever Spacer

LEVER SPACER SEE DIAGRAM

(03)-Hammerhead Bolt - M8x40 Flange Bolt - 9.108.040

M8x1.25x40 bolt.  M8 x 1.25 x 40 bolt Size: M8 (Metric 8mm diameter) Length: 40mm Thread Pitch: 1.25mm Type: Hex Washer Head Price is per bolt Hammerhead part # 9.108.040Hammerhead part # 9...

(03)-Hammerhead Pin, M10x16 Dowel Pin for 150cc, GY6 - M150-1001007

10 x 16 Dowel Pin Size: M10 (Metric 10mm diameter center opening) Height: 16mm Type: Dowel Pin Hammerhead Part # M150-1001007, 152MI-011007Polaris part # 3050047American Sportworks Part # 14266Baja...

(03)-Hammerhead Seal, Valve Stem Seal for 150cc, GY6 - M150-1001310

150cc Valve Oil Seal / Valve Stem SealHammerhead part # m150-1001310Hammerhead part # 152mi-022500Trailmaster part # 152.12.104American Landmaster part # 14268

(03)-Hammerhead Tube, Valve Cover Breather Tube for 150cc, GY6 - M150-1001001

Breather tube for 150cc  FUEL LINE-54 CMHammerhead part # M150-1001001 Polaris part # 8450040-54

(03/04) Hammerhead Belt Cover Snorkel Tube for 150cc with F/N/R

Snorkel Tube for engine belt cover.  Works on vehicles with 150cc with Forward / Neutral / Reverse.  This snorkel is used on Trailmaster, American SportWorks and Hammerhead 150cc karts with...

(03/04) Hammerhead Mudhead SE ROPS Tube, Long Roll Cage Bar (left and right)

This is the long roll cage bar that goes from the front to the back of the Mudhead SE ONLY!!!.  This roll cage bar works for both sides of the kart and will NOT work for Mudhead / 208R...

(03/07) Hammerhead M6x20 Flange Bolt

Flange Bolt, M6x20 Size: M6 (Metric 6mm diameter) Length: 20mm Thread Pitch: 1mm Type: Flanged Price is per bolt   PART#S Hammerhead part # 9.106.020, 9.100.005American SportWorks part #...

(04) Cover

Small cover behind the variator on 150cc engines with F/N/R.  The o-ring for this part is part #14284.  This is only for the motors with F/N/R.This part is associated with the left-side...

(04) Hammerhead Bearing Housing, Rear

This is the housing used to hold the axle bearing to the rear swing arm.  Two housings are used per rear swingarm with one housing for each side of unit.     Hammerhead part # 8...

(04) Hammerhead Decal / Sticker, Passenger (Right) Roll Cage

Passenger Side Roll Cage Bar Decal Sticker for GTS150. ***Picture shows both sides***     Hammerhead part # 13-1211-00RHammerhead part # 9.090.073

(04) Hammerhead Air Cleaner Assembly for 150cc / 300cc

Air Cleaner Assy. comes complete with box, cover and the air filter (part # 6.000.151).Please use this for part # 7.010.047 - as this is no longer available.Air Box Assy. also works for the GT...

(04) Hammerhead Battery Cushion

Battery Cushion used on all Hammerhead 150s/250s and Mudhead.  Lower battery cushion used on most chinese karts and atv's. Battery "cushion" to help insulate the battery from excessive shaking...

(04) Hammerhead Bolt - M12x28 Banjo Bolt for Oil Line

Banjo Bolt for Oil Cooler Lines Size: M12 (Metric 12mm diameter) Length: 28mm Thread Pitch: Type: Banjo Price is per bolt Hammerhead part # 8.010.149American Landmaster part # 14537

(04) Hammerhead Bolt M8 Locking Flange Nyloc Nut

M8 Locking Nyloc Flange Nut Hammerhead part # 7547332Polaris part # 7547332

(04) Hammerhead Bolt, M6X65 Flange Bolt

M6 x 65 Flange Bolt Used on F/R Belt Cover Size: M6 (Metric 6mm diameter) Length: 65mm Thread Pitch: 1mm Type: Flanged Price is per bolt Hammerhead part # M150-1008006Hammerhead part # 9...

(04) Hammerhead Bolt, M8 x 145 Shoulder Bolt

M8 * 145, Throttle Pedal Bolt.  This bolt is also used in the lower a-arm of the Mudhead / Mudhead 208R. Newer Mudhead / Mudhead 208R models use a different bolt, part # 9.108.145 inside a...

(04) Hammerhead Brake Disc Front

Front Brake Disc with an outer diameter approximately 5" and inner diameter approximately 1-13/16"**5" Diameter (roughly 127-130mm)**Center hole is 1 7/8"  **Six bolt pattern is 2...

(04) Hammerhead Copper Crush Washer for Brakes

Copper Crush WasherHammerhead part # 13-1422-00

(04) Hammerhead Electrical Box Cover

Electrical Box Cover for most 150 and 250 karts.  Please note that htis electrical cover does not fit every go-kart model.  Some of the new electrical covers now have an on/off switch...

(04) Hammerhead Engine Mount Link Spacer

Bushing - Enginer Adj Isolator Bushing       Hammerhead part # 8.020.045American Sportworks part # 14713American Sportworks Part # 14468Baja Part # BR150S-127Baja Part #...

(04) Hammerhead Gts 150 (Platinum) Lug Nut Cap m10 (tapered seat)

Chrome Capped lug nut M10. Used with aluminum wheels.   Size M10x1.25x15 Should work on any vehicle with 10mm hub stud bolts Hammerhead part # 8.010.118 Polaris part # 303044057

(04) Hammerhead Gts 150 M10 Locking Flange Nut / M10 Lug Nut

M10 locking flange nut Size: M10 (Metric 10mm diameter center opening) Height: Thread Pitch: 1.25mm Type: Flange Lock Nut Price is per piece Hammerhead Part # 9.220.010 Old TJ Power Sports...

(04) Hammerhead GTS Allen Bolt M8x1.25x16

SEE DAIGRAM IN LINK ABOVE

(04) Hammerhead Headlight Collar

Hammerhead part # 8.010.048

(04) Hammerhead Horn Button

This is the horn switch that snaps into the dash for horns.  This horn button measures roughly 1 and 1/4"This horn switch is use on the Hammerhead and Trailmaster 150cc and 250cc and 300cc...

(04) Hammerhead Horn Switch for Mudhead 208r

Horn Switch for dash on Mudhead 208r     Hammerhead Part# 6.000.133-M     Keywords: HAMMERHEAD MUDHEAD SAFETY BELT, HAMMERHEAD MUDHEAD POWER ON/OFF TOGGLE SWITCH, HAMMERHEAD...

(04) Hammerhead LE 150 3/8-16 x 1-1/4 Hex Screw

Hammerhead LE 150 Roll Cage ScrewHammerhead part # 7517935Polaris part # 7517935

(04) Hammerhead LE 150 Fender Bracket Front Left (Driver)

Hammerhead LE 150leftt front fender bracketDriver side Hammerhead part # H1020021

(04) Hammerhead LE 150 Fitting, Vent Line Round 90

Hammerhead part # 5455313  

(04) Hammerhead LE 150 Parking Brake Cable 47"

LE 150 parking brake cable.Measures 47" from end to end Hammerhead Part # H7080004

(04) Hammerhead Lower Chain Guard / Chain Protector

This lower chain guard bolts to the side of the engine and only works on engines that have F/N/R.     Hammerhead part # 14185 Trailmaster part # 7010032150G001Trailmaster part # 7...

(04) Hammerhead M16 Flat Washer

#4 IN PARTS SCHEMATIC         Hammerhead part # 9.700.016Hammerhead part # 9.300.016American Landmaster part # 14724