Hammerhead By Polaris

(05) Hammerhead M10x50 Flange Bolt

    Hammerhead part # 9.110.050     Keywords: HAMMERHEAD MUDHEAD REAR BRAKE PAD, HAMMERHEAD MUDHEAD REAR BRAKE CALIPER, HAMMERHEAD MUDHEAD ALLEN BOLT M8X1.25X14,...

(05) Hammerhead Mudhead SE Bolster Tube, LH (Driver Side)

The J-Bar or Side Arm Bar works only for the DRIVER side for the Mudhead SE. This will DOES NOT work for the Mudhead / 208RDoes NOT come with any hardware.Hammerhead part # H1020079

(05) Hammerhead Mudhead SE Front Fender Right (Passenger)

FRONT PASSENGER SIDE FENDER FOR MUDHEAD SE Hammerhead part # H5450029   HARDWARE NOT INCLUDED!  

(05) Hammerhead Mudhead SE LED Headlight Right Side (Passenger)

LED HEADLIGHT PASSENGER SIDE/RIGHT SIDE FOR MUDHEAD SE/LE 150Hammerhead part # H2410014  

(05) Hammerhead Mudhead SE Nut 3/8-16 Nylon

NUT FOR ROPS ROLL CAGE FOR MUDHEAD SEHammerhead part # 7542451 Price is per nut.

(05) Hammerhead Nitrogen Gas Shock, Rear (Platinum GTS 150)

Rear Gas Shock for Platinum GTS150 with piggyback reservoir for smoother ride.  This rear gas shock will fit nearly all 150cc Hammerhead karts.       Hammerhead part # 6.000...

(05) Hammerhead Nut, M12 Locking Flange Nut

Locking Flange Nut M12. Size: M12 (Metric 12mm diameter center opening) Height: ~7mm Thread Pitch: 1.25mm Price is per piece Multiple uses for this nut so this will cross reference for different...

(05) Hammerhead O-Ring (107x2) for 150cc, GY6

m107 x 2 O-ring for small left cover, part # 14283, on crankcase for F/N/R 150ccHammerhead part # 14284Polaris part # 3050023 O-RING 107X2

(05) Hammerhead Piston Pin Clip for 150cc, GY6

***SOLD INDIVIDUALLY***Hammerhead part # M150-1004003Trailmaster part #  152.01.307Carter Brothers Part # 515-1035American Landmaster Part # 14345

(05) Hammerhead Rear Shock (GTS 150)

10mm (.4") Mounting Hole 345mm from center to center (or roughly 13.5-13.75 inches)  2-1/2" wide  Trailmaster: 150 XRX and 150 XRS  (Rear Shock) Trailmaster: 150UTV (Rear...

(05) Hammerhead Shift Disc-Cable Equalizer for 150cc with F/N/R and Mudhead 208R

Shift Control Disc for 150cc with Forward / Neutral / Reverse transmission.  Shift Contol Disc for Mudhead 208R (Mudhead with Reverse)   Cable Equalizer PART#S Hammerhead part #...

(05) Hammerhead Shift Pawl Rod / Shift Fork Rod for 150cc with F/N/R

Shift Pawl Rod for 150cc with Neutral positionFork ShaftHammerhead part # 14304 Trailmaster part # 157F.10.404

(05) Hammerhead Shroud, Lower for 150cc, GY6

150cc Lower Shroud. Original replacement lower engine cooling shroud for GY6 engines.Hammerhead part # M150-1009301American SportWorks part # 14543Baja Reaction 150 (2-seats) Part #...

(05) Hammerhead Spring, Throttle Pedal Return Spring for 150cc / 250cc / 300cc

M8 * 145, Throttle Pedal Bolt.  This bolt is also used in the lower a-arm of the Mudhead / Mudhead 208R. 150cc Throttle Return Spring / 250cc Throttle Return SpringThrottle Pedal Return...

(05) Hammerhead Steering Shaft Bushing

Steering Shaft Bushing for 150s and 250s.   Bushing is 20x28x24 PART#SHammerhead part  # 7.010.026American Landmaster part # 14104Trailmaster part # 7.010.026

(05) Hammerhead Tire/Wheel Assembly 16x7x8 Rear Left (Driver)

#5 IN PARTS SCHEMATIC         Hammerhead part # 6.000.316  

(05) Hammerhead Tube Seat 25, 1" (25mm) for 150cc / 250cc

Tube Seat 25 (25mm or 1") for rollcage bars on the 150 and 250 karts.  This is the black plastic piece with a half-moon shape on end of the rollcage bars where the bolts go in.  Please note...

(05) Hammerhead Washer, M10 Copper Crush Washer for Oil Cooler

Copper Crush Washer also referred to as a "gasket " for the oil cooler in older parts manauls.M10Hammerhead part # 8.020.178American Landmaster part # 14538

(05) Rubber Parking Brake Lever Cover for 150cc

Forward / Reverse Shifter Cover for 150s with Forward and Reverse only (External Reverse with NO neutral position).  Cover for Parking Brake assembly on all 150/250/300 HammerHead, American...

(05)-Hammerhead Camshaft Chain / Timing Chain for 150cc, GY6 - M150-1005400

Camshaft chain for 150cc / 150cc Timing Chain for all 150cc Gokarts from Hammerhead, Trailmaster and American Landmaster14352 Chain, CamshaftHammerhead part # M150-1005400Polaris part #...

(05)-Hammerhead Clutch Roller for 150cc, GY6 - M150-1071002

Hammerhead 150cc Stock Clutch Roller.  Six rollers are used in the 150cc Variator / 150cc Front Clutch, Part # M150-1071000***SOLD INDIVIDUALLY******Price is per 1 roller, 6 rollers does 1...

(05)-Hammerhead O-Ring 27x2 for 150cc, GY6 - M150-1001201

27 x 2 O-ring O-RING-THROTTLE BODY,2X27Hammerhead part # M150-1001201 Polaris part # 5416176American Sportworks Part # 14261Baja Reaction 150 (2-seater model) Part #...

(05)-M150-1001303 M150-1001303, SPRING VALVE OUTER, INNER **SPECIAL ORDER***

M150-1001303 M150-1001303, SPRING VALVE OUTER, INNER **SPECIAL ORDER***

(05/10) Hammerhead GTS 150 Nut, M8 Exhaust / Muffler Nut

Muffler nut for 250cc / Exhaust nut for 250ccHammerhead Part # 9.040.027-250 

(05/20) Hammerhead Washer, M22x31x2.5 Flat Washer

Flat Washer M22 x 31 x 2.5 Flat / Adjust Washer 25Hammerhead Part # 14511Trailmaster part # 157F.10.437Hammerhead part # M150-1004013

(06) Hammerhead Brake Disc Rear for 150cc / 250cc / 300cc

This rear disc brake is used on all Hammerhead 150s and 250s Works with most 150cc and 250cc buggies, regardless of vehicle brand Used on all Hammerhead 150cc and 250cc buggies Has a mounting hole...

(06) Hammerhead Bearing 6200, 10x30x9 Ball Bearing for 150cc CVT Cover

10 x 30 x 9 Bearing 6200, Ball Bearing 6200-2RZ. This 6200 Bearing is found on 150cc buggies with internal reverse in the Left Side Cover area of the parts manual. These vehicles will have Forward /...

(06) Hammerhead Bearing 6204-Z, Inner Hub Bearing

This 6204z sealed bearing is used on all hammerhead 150cc and 250cc model.  This bearing is most commonly used as an inner front hub bearing   Hammerehad Part # 9.030.002-zHammerhead Part #...

(06) Hammerhead Bolt, M5x12 Hex Bolt

m5x12 Bolt Size: M5 (Metric 5mm diameter) Length: 12mm Thread Pitch: .75mm Type: Hex Price is per bolt Hammerhead part # 9.100.512Hammerhead part # 92101-05012-OHAmerican Landmater part #...

(06) Hammerhead Bolt, M8x75 Allen Head Bolt

M8 * 75 Allen Head Bolt for oil cooler assembly Size: M8 (Metric 12mm diameter) Length: 75mm Thread Pitch: 1.25mm Type: Flange Price is per bolt Hammerhead part # 9.108.075Polaris part #...

(06) Hammerhead Engine Stop Button, Kill Switch

Engine kill button that snaps into dash to shut off engine immediately when pushed.Used on most all 150cc karts and 250cc karts.  Does NOT work for R-150 or GL 150.Hammerhead part # 6.000...

(06) Hammerhead GTS 150 M16 Castle Nut M16

#6 IN PARTS SCHEMATIC     Hammerhead part # 9.800.016American Sportworks part # 14249Baja Reaction 150 (2-seater model) Part # BR150S-284Baja Reaction 250 Part # BR150S-284Baja Dune 150...

(06) Hammerhead GTS Connecting Rod, Swing Arm Dog Bone

***DOES NOT COME WITH BUSHINGS, PART # 7.010.008, OR GREASE FITTINGS, PART # 9.220.009***     Hammerhead part # 8.030.001 American Landmaster part # 14174Polaris part # 205043045

(06) Hammerhead Key/Ignition Switch with Keys for Mudhead 208r

Ignition/Key Switch with Keys for Mudhead 208r     Hammerhead Part# 20-0301-00     Keywords: HAMMERHEAD MUDHEAD SAFETY BELT, HAMMERHEAD MUDHEAD POWER ON/OFF TOGGLE SWITCH,...

(06) Hammerhead M12 Acorn Nut

To fit top of Front Strut - Hammerhead 150cc, 150GTS & 250cc BuggiesHammerhead Part # 8.010.140 

(06) Hammerhead M12 Flat Washer

Flat Washer F12     Hammerhead part # 9.300.012Hammerhead part # M150-1040005Hammerhead part # M150-1003019American Landmaster part # 14690Baja Part # BR150S-430, BR150S-486Baja Part #...

(06) Hammerhead M5x12 Pan Screw

M5 x 0.8 x 12 pan screw for shifter   PART#SHammerhead part # 9.600.512Polaris part # 7518796

(06) Hammerhead M6x15 Phillips Head Bolt

m6 x 15 Large Head Phillips Screw Size: M6 (Metric 6mm diameter) Length: 15mm Thread Pitch:  Type: Phillips Head Price is per bolt PART#S Hammerhead part # 003-060015-00Hammerhead part # 9.600...

(06) Hammerhead M8x14 Allen Head Bolt for Brake Caliper

M8 x 1.25 x 14 allen head bolt / Bolt - Bolt Strap M8*14Allen bolt that is used to hold front brake caliper on to strut. Size: M8 (Metric 8mm diameter) Length: 14mm Thread Pitch: 1.25mm Type: Allen...

(06) Hammerhead M8x222 Brake Pedal Bolt

m8x1.25x222 Bolt Size: M8 (Metric 10mm diameter) Length: 222mm Thread Pitch: 1.25mm Type: Brake Pedal Price is per bolt Hammerhead part # 9.708.222Polaris part # 205043007Carter Brothers part...