Hammerhead By Polaris

(09) Hammerhead Lower Swing Arm With Oil Cooler Mount

Rear Lower Swing Arm for most Hammerhead 150cc kartsRoughly, 22 3/8" center to center     Hammerhead Part # 2.000.042 Hammerhead part # 13-0626-01

(08) Hammerhead M18x37 Swing Arm Collar

Rear Swing Arm Bolt Collar used on many models of 150cc buggies for the mounting hardware for the Upper Rear Swing Arm to the Rear Swing Arm area.     Hammerhead part # 8.010...

(07) Hammerhead Rear Swing Arm Bushing

Rear Swing arm bushing for most 150s and 250s.  These are the rear swing arm bushings that go on the upper portion of the rear, lower swing arm..  For lower swing arm bushings use part # 7...

(05) Hammerhead Nitrogen Gas Shock, Rear (Platinum GTS 150)

Rear Gas Shock for Platinum GTS150 with piggyback reservoir for smoother ride.  This rear gas shock will fit nearly all 150cc Hammerhead karts.       Hammerhead part # 6.000...

(05) Hammerhead Rear Shock (GTS 150)

10mm (.4") Mounting Hole 345mm from center to center (or roughly 13.5-13.75 inches)  2-1/2" wide  Trailmaster: 150 XRX and 150 XRS  (Rear Shock) Trailmaster: 150UTV (Rear...

(02) Hammerhead Lower Swing Arm Bushing

Rear Swing Arm Bushing for most 150s and 250s.  These are the lower swing arm bushings.  For the upper swing arm bushings use part # 7.010.006       Hammerhead part # 7...

(10) Hammerhead Engine Mount Collar

        Hammerhead part # 8.010.025 American Landmaster part # 14177Carter Bros GSR, GSX 150 part #  500-1301 Trailmaster Part # 8.010.025Polaris part #...

(09) Hammerhead M10x195 Flange Bolt

Size: M10 (Metric 10mm diameter) Length: 195mm Thread Pitch: 1.25mm Price is per bolt         Hammerhead part # 9.710.195 Hammerhead part # 9.110.195Polaris part # 7520546

(08) Hammerhead Connecting Rod (Dog Bone) Spacer

Washer Plater         Hammerhead part # 8.020.013 American Landmaster part # 14176Carter Bros part #  528-3001 Trailmaster Part # 8.020.013Polaris part #...

(06) Hammerhead GTS Connecting Rod, Swing Arm Dog Bone

***DOES NOT COME WITH BUSHINGS, PART # 7.010.008, OR GREASE FITTINGS, PART # 9.220.009***     Hammerhead part # 8.030.001 American Landmaster part # 14174Polaris part # 205043045

(05) Hammerhead GTS Bushing, 15x21x10

      Hammerhead part # 7.010.008 Polaris part # 209038012American Landmaster part # 14175

(04) Hammerhead GTS Allen Bolt M8x1.25x16

SEE DAIGRAM IN LINK ABOVE

(02) Hammerhead GTS M12x60 Flange Bolt

Size: M12 (Metric 12mm diameter) Length: 60mm Thread Pitch: 1.25mm Type: Flange Price is per bolt     Hammerhead part # 9.112.060American Landmaster part # 14452

(01) Rear Swing Arm

Rear Upper Swing Arm for most 150cc karts.WILL NOT fit Hammerhead Junior or Hammerhead GL150 or LE 150     Hammerhead part # 2.000.029 Hammerhead part # 2.000.062American...

(04) Hammerhead Battery Cushion

Battery Cushion used on all Hammerhead 150s/250s and Mudhead.  Lower battery cushion used on most chinese karts and atv's. Battery "cushion" to help insulate the battery from excessive shaking...

(03) Hammerhead Battery Strap

Strap that holds battery cover down on battery.  Works for nearly all models.     Hammerhead part # 7.020.023Old TJ Powersports Part # 7.021.023 Carter Brothers part #...

(02) Hammerhead Dynavolt Battery GTX9-BX (DTX9-BS) (YTX9-BS)

This is the stock battery for all Hammerhead 150cc go karts and UTVs and Mudhead   Dimensions (rough estimate): L: 5 7/8"  W: 3 7/16" H: 4...

(01) Hammerhead Battery Cover

(09) Hammerhead M5x20 Pan Screw

M5x20 pan screw for tail lightHammerhead part # 9.600.520

(07) Hammerhead Tail Light

Brake light assy for most go-karts.  Rectangular assembly and includes the bulb.   Lens is 6" x 1.5"   Hammerhead Part # 6.000.010American SportWorks part # 14462Old TJ Power...

(05) Hammerhead Headlight

Headlight for GTS or GL or Rave.  Comes with the bulb.Hammerhead part # 13-0206-00

(04) Hammerhead Headlight Collar

Hammerhead part # 8.010.048

(03) Hammerhead Headlight Spacer

Hammerhead part # 8.010.049

(02) Hammerhead Rubber Mount

Hammerhead part # 7.020.049

(14) Hammerhead Battery Speed Sensor

Speed pickup sensor for Hammerhead models with speedometer.   Used with all Hammerhead and Trailmaster karts with speedometers.Does NOT include the magnet, part # 7.050.001...

(13) Hammerhead Battery Cables, Positive and Negative

Battery Cables, both positive and negativePostive cable measures roughly 24 inchesNegative cable measures roughly 20 inches         Hammerhead Off-Road part # 6.000...

(12) Hammerhead Ignition Coil

Ignition Coil for 150cc Chinese go-karts.     Hammerhead Part # 6.000.126Old TJ Power Sports Part # 6.000.025Old TJ Power Sports Part # 6.000.026Old TJ Power Sports Part # 6.000.125Carter...

(11) Hammerhead M6x25 Flange Bolt

M6 x 25 bolt for 150cc fan/shroudM6 x 25 Flange Bolt for 250cc Cylinder headM6 x 25 bolt that is also used in several other places.  Also, this part number is under several different part...

(08) Hammerhead Rectifier-Regulator

This is the stock regulator used on all Hammerhead 150cc models and most American Sportworks 150cc karts.  This is the stock regulator that works on nearly all 150cc go karts, including...

(06) Hammerhead Starter Relay

Starting relay or solenoid that is used on all Hammerhead 150 and 250 models (except GT250).This starter relay is also used on most Carter Brothers and American Sportworks150cc go-karts and probably...

(05) Hammerhead CDI

CDI that is used on all 2017 and newer Hammerhead 150cc GOKART models.  This CDI has a 7500 RPM maximum limit.  This will NOT work for the 6.000.267 and ONLY works on 2017 and newer...

(04) Hammerhead Electrical Box Cover

Electrical Box Cover for most 150 and 250 karts.  Please note that htis electrical cover does not fit every go-kart model.  Some of the new electrical covers now have an on/off switch...

(03) Hammerhead M6x55 Pan Screw

Bolts for electric cover / Screw pan m6x55 Size: M6 (Metric 6mm diameter) Length: 55mm Type: Pan-head Price is per bolt     Hammerhead part # 9.600.655 American Sportworks part #...

(01) Hammerhead Wiring Harness

GTS 150 Wiring Harness withOUT turn signal connectors. This wiring harness only works for the GTS 150 with a NEUTRAL position (Forward/Neutral/Reverse). Hammerhead started using this wiring harness...

(13) Hammerhead Horn

Horn that works on either side and is used on all TrailMaster and Hammerhead karts.Only one horn is shipped, even though some images might show two. PRICE IS PER HORN!   Hammerhead part # 6.000...

(12) Hammerhead Rubber Plug

SEE DIAGRAM PAGE 33

(11) Hammerhead Power Outlet,12-Volt

12-volt Auxiliary Power Outlet that goes into dash.  OEM 12V Power Outlet for the power outlet on the dashboard panel for Hammerhead 150, 250, and 300cc buggies. This is a power outlet used...

(09) Hammerhead Control Relay

Control Relay located in dash.  SKU# 15016 Brake interlock RelayRelay/Safety switch used on the 200 Series Light Utility VehiclesAlso used on the YS36 Electric Light Utility Vehcles by American...

(08) Hammerhead Dash Board / Switch Panel Cover

Switch panel cover for GTS150s with Forward / Neutral / Reverse (F/N/R)Switch cover panel for SS250 and GTS250.   This GTS150 dash works for GTS with keyed ignition. Switch panel cover for...

(07) Hammerhead Ignition Switch

Standard three wire ignition key switch. This 3wire key switch will work on several go-kart models including the SS150, new-style GTS150 w/ internal reverse, and the GTS250.This 3-wire ignition...