Steering Assembly

(01) Hammerhead Steering Wheel Bolt Cover

Plastic cover that clips onto the center of steering wheel for majority of 150 and 250 gocarts out there.   PART#S Hammerhead Part # 7.010.041 American SportWorks Part # 14100 TrailMaster Part # 7.010.041-300GK

(03) Hammerhead Steering Wheel for 150cc and 250cc

This steering wheel is used on all Hammerhead 150cc and 250cc karts.  Used pretty much on all Chinese 150/250 gokarts.   PART#S Hammerhead Part # 7.020.038Carter Brothers part # 536-3027 / 5363027American Sport Works part # 14102 

(04) Hammerhead Steering Shaft for 150cc / 250cc / 300cc

Steering Shaft for nearly all 150s and 250s.  For R-150 steering shaft, please use part # 15-1004-00   PART#S 150cc steering shaft may come in black or silver. Hammerhead part # 6.000.122Hammerhead part # 6.000.092Carter Bros part...

(05) Hammerhead Steering Shaft Bushing

Steering Shaft Bushing for 150s and 250s.   Bushing is 20x28x24 PART#SHammerhead part  # 7.010.026American Landmaster part # 14104Trailmaster part # 7.010.026

(06) Hammerhead M6x15 Phillips Head Bolt

m6 x 15 Large Head Phillips Screw Size: M6 (Metric 6mm diameter) Length: 15mm Thread Pitch:  Type: Phillips Head Price is per bolt PART#S Hammerhead part # 003-060015-00Hammerhead part # 9.600.615Hammerhead part # 003-060010-00 (this is 10mm but...

(08) Hammerhead 12x16x12 Suspension Arm Bushing

These are the bushings used on the front suspension a-arms for most kart models. Each suspension arm uses two bushing (one per side).These bushings can also be used as pedal bushings on the 80T, Mudhead and Trailmaster Mid XRX.  Each pedal uses two...

(16) Hammerhead M8x25 Flange Bolt

This M8x25 Washer Bolt is often found on many 150cc and 250cc buggies in the Steering Shaft Assembly and  Rear Cargo Rack areas. Often used to secure fuel tanks to the chassis. Size: M8 (Metric 8mm diameter) Length: 25mm Thread Pitch: 1.25mm Type:...

(17) Hammerhead Steering Knuckle / Steering U-Joint

Steering knuckle for 150s and 250s.  This is the older-style steering knuckle used on most karts before 2009.  This steering knuckle is NOT adjustable and measures roughly 11 inches from end to end.  This steering knucle is used on most...

(18) Hammerhead Steering Knuckle Dust Cover

Dust Cover for the steering knuckle for steering column for nearly all 150cc and 250cc gokarts.Seal - Steering Shaft Boot   PART#SHammerhead part # 7.020.066American SportWorks part # 14412Trailmaster part # 7020066250G000Polaris part # 20603606

(19) Hammerhead Rubber Dust Cover for Steering Ball Joint

Dust Cover for most 150cc and 250cc karts / Rubber Boot for Rack and Pinion SteeringUsed on American SportWorks Go-Kart Model 7150 & 200 Series Light Utility VehilceRoughly 4" long from end to end.   PART#SHammerhead Part # 7.020.002Old TJ Power...

(22) Hammerhead Steering Gear Bracket for 150cc / 250cc / 300cc

Steering Gear Bracket for 150cc / 250cc / 300cc gokartsSteering Gear Bracket for LE 150.  Bracket for part # 4.000.008-250 on LE 150   PART#SHammerhead part # H5260000Hammerhead part # 8.020.014

(23) Hammerhead Steering Gear

The steering stem is set at a 45 degree wide angle to body.  Body is roughly 13" wide.  This Steering Gear fits nearly all 150s and 250s.Please double check pictures before ordering.  It is important to measure the body of your steering...

(24) Hammerhead Tie Rod 5.5"

5.5" long tube threaded (M8) on both ends. one end is a right-hand threaded and the other end is left-hand threaded.Hammerehad part # 8.010.157-GTS

(25) Hammerhead Tie Rod End

The tie rod end attaches the tie rod to the strut. This tie rod end is used on nearly all Hammerhead 150cc and 250cc buggies, except for the GTS 250 which uses part # 6.000.062-250.**Some manuals might say 6.000.062-250, but the -250 tie rod...

(26) Hammerhead M10 Flat Washer

Steering Gear Bracket for 150cc / 250cc / 300cc gokartsFlat Washer 10   PART#SAmerican Sportworks Part # 14240Joyner Part # 222.10Carter Bros part # 500-3025SunL SLGK-250-2A Part # GB97.1-85Trailmaster Part # 157F.11.405Trailmaster part #...

(27) Hammerhead M10 Lock Washer

Steering Gear Bracket for 150cc / 250cc / 300cc gokartsf10 Lock Washer   PART#S Hammerhead part # 9.400.010 Trailmaster part # 93001000000002American Sportworks Part # 14241Baja Part # BR150S-157Baja Part # BR250-207Joyner Part # 555...

(28) Hammerhead M10 Castle Nut

m10 Castle Nut Type: Castle NutSIze: M10 (Metric 10mm center)Thread Pitch: 1.25mmPrice is per item   PART#S Hammerhead part # 9.800.010 American Landmaster part # 14242Baja Dune 150 Part # DN150-106Joyner 250cc Part # 333.10, GB/T9457-1988...

(29) Hammerhead Cotter Pin M2x15

  PART#S Hammerhead part # 9.500.215American Sportworks Part # 14110Carter Brothers part # 500-1072Tomberlin Crossfire Part # 1010647Trailmaster Part # 9.500.215

(30) Hammerhead Steering Ball Joint for 150cc / 250cc / 300cc

  PART#S Hammerhead Part # 4.000.008Trailmaster Part # 4.000.008-150XRSCarter Brothers part #  536-3006 / 5363006Metal Motorsports Part # KT04-015 Metal Motorsports ParT # MT04-015