Hammerhead By Polaris

(11) Hammerhead M6x25 Flange Bolt

M6 x 25 bolt for 150cc fan/shroudM6 x 25 Flange Bolt for 250cc Cylinder headM6 x 25 bolt that is also used in several other places.  Also, this part number is under several different part...

(08) Hammerhead Rectifier-Regulator

This is the stock regulator used on all Hammerhead 150cc models and most American Sportworks 150cc karts.  This is the stock regulator that works on nearly all 150cc go karts, including...

(06) Hammerhead Starter Relay

Starting relay or solenoid that is used on all Hammerhead 150 and 250 models (except GT250).This starter relay is also used on most Carter Brothers and American Sportworks150cc go-karts and probably...

(05) Hammerhead CDI

CDI that is used on all 2017 and newer Hammerhead 150cc GOKART models.  This CDI has a 7500 RPM maximum limit.  This will NOT work for the 6.000.267 and ONLY works on 2017 and newer...

(04) Hammerhead Electrical Box Cover

Electrical Box Cover for most 150 and 250 karts.  Please note that htis electrical cover does not fit every go-kart model.  Some of the new electrical covers now have an on/off switch...

(03) Hammerhead M6x55 Pan Screw

Bolts for electric cover / Screw pan m6x55 Size: M6 (Metric 6mm diameter) Length: 55mm Type: Pan-head Price is per bolt     Hammerhead part # 9.600.655 American Sportworks part #...

(01) Hammerhead Wiring Harness

GTS 150 Wiring Harness withOUT turn signal connectors. This wiring harness only works for the GTS 150 with a NEUTRAL position (Forward/Neutral/Reverse). Hammerhead started using this wiring harness...

(13) Hammerhead Horn

Horn that works on either side and is used on all TrailMaster and Hammerhead karts.Only one horn is shipped, even though some images might show two. PRICE IS PER HORN!   Hammerhead part # 6.000...

(12) Hammerhead Rubber Plug

SEE DIAGRAM PAGE 33

(11) Hammerhead Power Outlet,12-Volt

12-volt Auxiliary Power Outlet that goes into dash.  OEM 12V Power Outlet for the power outlet on the dashboard panel for Hammerhead 150, 250, and 300cc buggies. This is a power outlet used...

(09) Hammerhead Control Relay

Control Relay located in dash.  SKU# 15016 Brake interlock RelayRelay/Safety switch used on the 200 Series Light Utility VehiclesAlso used on the YS36 Electric Light Utility Vehcles by American...

(08) Hammerhead Dash Board / Switch Panel Cover

Switch panel cover for GTS150s with Forward / Neutral / Reverse (F/N/R)Switch cover panel for SS250 and GTS250.   This GTS150 dash works for GTS with keyed ignition. Switch panel cover for...

(07) Hammerhead Ignition Switch

Standard three wire ignition key switch. This 3wire key switch will work on several go-kart models including the SS150, new-style GTS150 w/ internal reverse, and the GTS250.This 3-wire ignition...

(06) Hammerhead Engine Stop Button, Kill Switch

Engine kill button that snaps into dash to shut off engine immediately when pushed.Used on most all 150cc karts and 250cc karts.  Does NOT work for R-150 or GL 150.Hammerhead part # 6.000...

(05) Hammerhead Headlight Switch

Headlight switch used for single-beam headlightsHead light on/off switch for lights without hi/lo beamHammerhead part # 6.000.058 Hammerhead part # 16-0320-00 American SportWorks part #...

(04) Hammerhead Horn Button

This is the horn switch that snaps into the dash for horns.  This horn button measures roughly 1 and 1/4"This horn switch is use on the Hammerhead and Trailmaster 150cc and 250cc and 300cc...

(03) Hammerhead Rubber Plug for 12-Volt Outlet

Rubber Plug for Power Outlet in dashCar Cigarette Lighter PlugHammerhead part # 7.020.051 Polaris part # 208037027American Sportworks part # 14914

(02) Hammerhead Screw Cover

Rubber Screw Cover / Rubber Bolt CoverUsed on Dash and Electrical CoverHammerhead part # 7.010.061Polaris part # 5455568

(01) Hammerhead Speedometer for GTS 150 / Platinum GTS 150

Hammerhead GTS 150 Speedometer / Trailmaster 150 XRX speedometer / American Sportworks 7150 SpeedometerHas Left and Right turn signal indicators as well as a hi/low beam indicator.Trailmaster 150 XRX...

(17) Hammerhead Valve Stem

Valve Stem for WheelHammerhead part # 7.190.018

(16) Hammerhead M14 Flat Washer

WASHER. FLAT 1414mm is the opening of the center holeHammerhead part # 9.300.014Old Hammerhead part # 14690 

(15) Hammerhead CST Tire 19x7x8 Hammerhead Shark Tread, Front Tire

These front tires are used on 2017 and Newer Hammerhead GoKarts. 19x7-8 Tire Hammerhead Shark Tread Design Tubeless 19" Tall 7" Wide Used on 8" Wheel CU909 Hammerhead Off-Road Part #...

(14) Hammerhead Hub Cover

Dust cover for Hub for nearly all Hammerhead makes and models.  Works on both front and rear hubs.   Sold individuallyHammerhead part # 7.020.039Hammerhead part # 15.005.001 Carter...

(13) Hammerhead M2x20 Cotter Pin

Cotter Pin that secures the castle nut Type: Cotter Pin Size: 2mm x 20mm length Price is per item Hammerhead part # 9.500.220American Sportworks Part # 14150Baja Reaction 150 (2-seater model)...

(12) Hammerhead M14 Castle Nut

M14 castle nut used for front spindles  SIze: M14 (Metric 14mm center) Thread Pitch: 1.5mm Price is per item Hammerhead part # 9.800.014 Old Hammerhead part # 14727American...

(10) CST Tire/Wheel Assembly 19x7x8, Front, Left (Driver), Aluminum Wheel, Hammerhead Shark Tread

CSTHAMMERHEAD SHARK TREADALUMINUM WHEEL19 x 7 - 8Front Left Tire and Wheel assembly for Platinum GTS150 (2017 and newer)Driver Front Tire and Wheel Assembly for Platinum GTS 150 (2017 and...

(10) Hammerhead CST Tire/Wheel Assembly 19x7x8, Front, Left (Driver, Black Wheel, Hammerhead Shark Tread

CSTHAMMERHEAD SHARK TREADBLACK WHEEL19 x 7 - 8Front Left Tire and Wheel assembly for GTS150 (2017 and newer)Driver Front Tire and Wheel Assembly for GTS 150 (2017 and newer)

(09) Hammerhead Bearing 6202-Z, Outer Hub Bearing

Outer front hub bearing used on all Hammerhead 150cc and 250cc vehicles.  Also used on 150X/300X kartsInner front bearing used on all Mudhead / Mid-size kartsAlso used as inner bearing on the...

(08) Hammerhead Front Hub

Front hub used on many Chinese 150cc/ 250cc/300 go-karts ( TrailMaster, Hammerhead, Carter, American Sportworks).  Does not work with Yerfdog or Kandi karts. Bolt pattern is 110mm, 10mm...

(07) Hammerhead M10x31 Wheel Stud

m10x1.25x31 wheel stud bolt for the hub.  This is as the bolt that fastens through the wheel hub to become the stud bolts for mounting the wheel/tire.   Size: M10 (Metric 10mm...

(06) Hammerhead Bearing 6204-Z, Inner Hub Bearing

This 6204z sealed bearing is used on all hammerhead 150cc and 250cc model.  This bearing is most commonly used as an inner front hub bearing   Hammerehad Part # 9.030.002-zHammerhead Part #...

(05) Hammerhead Dust Seal for 150cc / 250cc / 300cc Inner Hub

Replacement dust seal size 47x25x7 Size 47 x 25 x 7 Used on the front hub as the inner seal for all 150cc and 250cc Hammerhead vehicles.  Used on all 150cc Go-Karts and Light Utility...

(04) Hammerhead Brake Disc Front

Front Brake Disc with an outer diameter approximately 5" and inner diameter approximately 1-13/16"**5" Diameter (roughly 127-130mm)**Center hole is 1 7/8"  **Six bolt pattern is 2...

(02) Hammerhead Wheel / Rim - 8", Front, Aluminum for GTS Platinum or LE 150

8" Aluminum wheel used on older Super Sport 150s and 250s as well as some Trailmaster units.  8" Aluminum wheel used on Platinum GTS150.  Bolt patterm is 4 x 110mmFront 8" Rim for...

(02) Hammerhead Wheel / Rim - 8", Front, Black for GTS 150

Front Rim for a GTS with a bolt pattern of 4 on 110.  This front wheel is steel painted BLACK and 8" in diameter.  This front wheel will also work for GTS 250, and Hammerhead 150cc and...

(01) CST Tire/Wheel Assembly 19x7x8, Front, Right (Passenger), Aluminum Wheel

CSTHAMMERHEAD-TREADALUMINUM  WHEEL19 x 7 - 8  Front Right Tire and Wheel assembly for Platinum GTS150 (2017 and newer)Passenger Front Tire and Wheel Assembly for Platinum GTS150 (2017...

(01) CST Tire/Wheel Assembly 19x7x8, Front, Right (Passenger), Black Wheel, Hammerhead Shark Tread

CSTHAMMERHEAD-TREADBLACK WHEEL19 x 7 - 8  Front Right Tire and Wheel assembly for GTS150 (2017 and newer)Passenger Front Tire and Wheel Assembly for GTS 150 (2017 and newer)Hammerhead Part...

(23) Hammerhead M10x80 Flange Bolt

Bolt M10x1.25x80 Size: M10 (Metric 10mm diameter) Length: 80mm Thread Pitch: 1.25mm Type: Flange Bolt Price is per bolt Hammerhead Part # 9.110.080Old TJ Power Sports Part # 9.100.017Kinroad Part #...

(22) Hammerhead Dust Cap, Lower Suspension

Lower suspension arm dust cap for both 150 and 250 gokartsThis is part of the Lower A-Arm suspension on the front of 150cc / 250cc / 300cc Gokarts and UTVs CAP-LWR SUSPENSION ARM,DUSTHammerhead part...

(21) Hammerhead O-Ring 21.2x2.65

O-RING 21.2 x 2.65 Size: Φ21.2mm (Metric 21.2mm diameter center opening) Thickness: 2.65mm Type: O-Ring Four (4) required per A-Arm Price is per piece Oring for lower suspension arm 150/250...