Hammerhead By Polaris

(08) Hammerhead Gear, Primary / Drive Shaft for 150cc with F/N/R

Drive shaft that the rear drive clutch (m150-1031000) is mounted on for 150cc vehicles with Forward / Neutral / Reverse Drive shaftHammerhead part # 14298 Trailmaster part # 157F.10.401Polaris...

(07) Hammerhead Shifting Gear Cluster, Shifting Shaft Assembly for 150cc with F/N/R

150cc Shift Gear Cluster Assembly that is used on all 150cc engines with D/N/R or F/N/R.  150cc Gear Shift AssemblyAssembly includes:  Shaft with fixed gear, Forward gear, Reverse gear, Dog...

(06) Hammerhead Pawl, Shift Selector Pawl for 150cc with F/N/R

Shift Selector Pawl for 150cc with Neutral position.  Fork ShaftShifing Fork for 150cc with F/N/RHammerhead part # 14303 Trailmaster part # 157F.10.403Polaris part # 3050289

(05) Hammerhead Shift Pawl Rod / Shift Fork Rod for 150cc with F/N/R

Shift Pawl Rod for 150cc with Neutral positionFork ShaftHammerhead part # 14304 Trailmaster part # 157F.10.404

(04) Hammerhead Shift Selector Assembly for 150cc with F/N/R

Shift Selector Assy for all 150cc with Neutral position.  Works for all Trailmaster 150cc and all American Sportworks 150cc.  Works on all FNR Hammerhead gokarts. and UTVs.Gearshift...

(03) Hammerhead Shifter Cam Shaft for 150cc with F/N/R

Shaft, Shifter Cam for 150cc models with F/N/RHammerhead part # 14305 Trailmaster part # 157F.10.440

(02) Hammerhead Transmission Case Gasket for 150cc with F/N/R

Gasket for the transmission case on Forward / Neutral / Reverse 150cc vehiclesGear Box Cover GasketGASKET-CCASE COVER RHHammerhead part # 14306Trailmaster part # 157F.12.305 Hammerhead part #...

(01) Hammerhead Cover, Transmission Housing WITH Shift Selector Hole for 150cc with F/N/R

Outer transmisison housing for 150cc vehicles with internal reverse.  This housing uses gasket, part # 14306***PLEASE NOTE THIS HOUSING HAS A HOLE FOR AN ELECTRONIC SHIFT...

(07) Hammerhead Screw, ST4.8x16-F Tapping Screw for Fan and Shroud, 150cc

4.8 X 16 Screw for 150cc shroud / 150cc fan.  Hammerhead part # M150-1009402American Landmaster part # 50065

(06) Hammerhead Screw, ST3.5x13 Tapping Screw

Screw for belt cover, 3.5 x 13 STFHHammerhead part # 9.804.003 Hammerhead part # ST3.5X13 GB845American Landmaster part # 14539

(05) Hammerhead Shroud, Lower for 150cc, GY6

150cc Lower Shroud. Original replacement lower engine cooling shroud for GY6 engines.Hammerhead part # M150-1009301American SportWorks part # 14543Baja Reaction 150 (2-seats) Part #...

(04) Hammerhead Shroud, Upper for 150cc, GY6

150cc Upper Shroud.  Original replacement upper engine cooling shroud for GY6 engines.Wind Guide Cover Assy., UpperHammerhead part # M150-1009110 American Sportworks part # 14545Baja...

(03) Hammerhead Duct, Carburetor Cooling Duct for 150cc, GY6

Carburetor Cooling Duct part of fan cover assembly, 150ccHammerhead part # m150-1009401Trailmaster part # 152.12.118American Landmaster part # 14542

(02) Hammerhead Dust Cover, Fan Isolation Mesh for 150cc, GY6

Dust cover for 150cc that is part of fan and shroud assy.Hammerhead part # 8.020.179American Landmaster part # 14541Trailmaster part # 152.05.002Hammerhead part # 157A.12.305

(01) Hammerhead Fan Cover, Cooling Fan Cover for 150cc, GY6

150cc Cooling Fan CoverHammerhead part # M150-1009410 American Landmaster part # 14540Trailmaster part # 152.05.00Carter Brothers part # 513-1043

(06) Hammerhead Bolt, M5x12 Hex Bolt

m5x12 Bolt Size: M5 (Metric 5mm diameter) Length: 12mm Thread Pitch: .75mm Type: Hex Price is per bolt Hammerhead part # 9.100.512Hammerhead part # 92101-05012-OHAmerican Landmater part #...

(05) Hammerhead Nut, M12 Locking Flange Nut

Locking Flange Nut M12. Size: M12 (Metric 12mm diameter center opening) Height: ~7mm Thread Pitch: 1.25mm Price is per piece Multiple uses for this nut so this will cross reference for different...

(04) Hammerhead Stator and Pickup, 8-Post for 150cc, GY6

This eight-post 150cc stator is the newest and ONLY Hammerhead Off-Road stator currently available. This stator replaces the six-post stator, but does NOT come with the flywheel.  This stator is...

(03) Hammerhead Flywheel for 150cc, GY6

150cc Flywheel that is used on all hammerhead, trail master, carter and american sportworks 150cc models with 8 post stator, will not work on 6 post stators.If replacing the older-style 6...

(01) Hammerhead Fan for 150cc, GY6

150cc Cooling FanHammerhead part # M150-1051100-3Polaris part # 3050092American SportWorks part # 14367

(07) Hammerhead Bolt, M6x16 Flange Bolt

150cc starter motor bolt m6x16bolt flange m6x16 Size: M6 (Metric 6mm diameter) Length: 16mm Thread Pitch: 1mm Price is per bolt m6x16 Flange BoltCommonly used for 150cc starter motorHammerhead part...

(06) Hammerhead Nut, M22x1 Spanner Left-Hand (Reverse) Thread Nut for 150cc, GY6

GY6 Starter Clutch NutLock Nut for the crankshaft area for GY6 150cc buggies, scooters and ATVs Type: Round Lock Nut (Spanner Nut) Size: M22 (22mm ID) Thread Pitch: 1mm Price is per item Hammerhead...

(05/20) Hammerhead Washer, M22x31x2.5 Flat Washer

Flat Washer M22 x 31 x 2.5 Flat / Adjust Washer 25Hammerhead Part # 14511Trailmaster part # 157F.10.437Hammerhead part # M150-1004013

(03) Hammerhead Shaft, Starter Reduction Shaft / Rod for 150cc, GY6

Shaft Starter Reduction Gear for GY6 150ccHammerhead part # M150-1060002Baja Part # BR150S-496Baja Part # DN150-310DongFang Part # 1.20.18.01.02000Joyner Part # GY150-307-0131Carter Brothers...

(04) Hammerhead Starter Clutch, Flange for 150cc, GY6

This Starter clutch works with all Hammerhead 150s and most 150cc out on the marketAlso, it is recommended to replace crankcase cover gasket (part # m150-1003013).Hammerhead Part #...

(02/03) Hammerhead Gear, Starter Reduction Gear for 150cc, GY6

GY6 150cc, Starter Reduction GearHammerhead part # m150-1060003American Sportworks Part # 14371Baja Part # BR150S-497Baja Part # DN150-309DongFang Part # 1.20.18.01.03000Joyner Part #...

(01) Hammerhead Starter Motor 12V, Electric for 150cc, GY6

This starter motor works on every 150cc Hammerhead, including the 150cc Rancher LT.   This 150cc starter motor assembly should work on just about all 150cc go-karts inlcuding 150cc...

(15) Hammerhead Bolt, M6x110 Flange Bolt

M6 x 110 Flange Bolt Size: M6 (Metric 6mm diameter) Length: 110mm Thread Pitch: 1mm Type: Flanged Price is per bolt Hammerhead part # M150-1003008American Sportworks part # 14339Joyner Part #...

(14) Hammerhead Bolt, M6x28 Flange Bolt

M6 x 95 Crankcase Bolt Size: M6 (Metric 6mm diameter) Length: 95mm Thread Pitch: 1mm Type: Flanged Price is per bolt Hammerhead part # M150-1003012American Sportworks part # 14337Joyner Viper 150...

(13) Hammerhead Bolt, M6x28 Flange Bolt

M6 * 28 Flange Bolt Size: M6 (Metric 6mm diameter) Length: 28mm Thread Pitch: 1mm Type: Flanged Price is per bolt Hammerhead part # 152MI-071007 Hammerhead part...

(12) Hammerhead Bolt, M6x35 Flange Bolt

M6 x 35 Flange BoltUsed for the F/R Belt CoverHammerhead part # M150-1003034Hammerhead part # M150-1003009Hammerhead part # 9.100.635Hammerhead part # 9.106.035Hammerhead part...

(11) Hammerhead O-Ring 18x3 for Oil Dipstick

250cc Oil Dipstick O-Ring / 150cc Oil Dipstick O-RingHammerhead Part # M150-1003307Hammerhead part # 172MM-013030 Trailmaster part # 152.12.108American Landmaster part # 14335

(10) Hammerhead O-Ring 30.8x3 for 150cc, GY6

O-Ring 30.8 x 3 used on all 150cc as the O-Ring gasket for the oil drain plug Size: Φ30.8mm (Metric 30.8mm diameter center opening) Thickness: 3mm Type: O-Ring Price is per...

(07) Hammerhead Clamp, AC Generator Clamp for 150cc, GY6

AC Generator Cord ClampHammerhead part # m150-1003006American Sportworks part # 14332Trailmaster part # 152.11.508

(06) Hammerhead Oil Dip Stick for 150cc, GY6

Plastic oil dipstick for checking engine oil levels.  This dipstick works for nearly all 150cc vehicles. DIP STICK-TRANSMISSION,150Hammerhead part # M150-1003105Carter Brothers part # 513-1021 /...

(05) Hammerhead Cap, Oil Drain Cap for 150cc, GY6

Oil drain cap for 150cc vehicles / Oil Screen Screw plug for 150ccHammerhead part # M150-1003104American SportWorks part # 14328Trailmaster part # 152.09.002

(04) Hammerhead Spring, Oil Filter Screen Spring for 150cc, GY6

Oil Filter Spring for 150cc vehicles / Oil Screen SpringHammerhead part # M150-1003102American SportWorks part # 14330Trailmaster part # 152.09.004

(03) Hammerhead Oil Filter Screen for 150cc, GY6

150cc Oil Filter Screen / 150cc Oil Screen  OIL FILTER SCREEN Hammerhead Part # m150-1003120American SportWorks part # 14329Trailmaster part # 152.09.003-OSPolaris part # 3050083

(02) Hammerhead Crankcase Cover Gasket for 150cc, GY6

Crankcase cover gasket is needed when replacing the starter clutch (part # M150-1060001) Starter Clutch Gasket Outer Crankcase gasket Hammerhead Part # M150-1003013 American SportWorks part #...

(01) Hammerhead Crankcase Cover, Outer for 150cc, GY6

150cc Crankcase cover, outer crankcase RH 150ccRight Crankcase Cover used in most all vehicles that have a GY6 150cc engine.Hammerhead part # M150-1003101 Hammerhead part #...