Hammerhead By Polaris

(2)-Hammerhead Clutch Bell, Clutch Drum / Housing for 150cc, GY6 - M150-1032000

Outter driven clutch drum for the 150cc clutch.   Outter 150cc clutch bellM150-1032000 Driven Disc CompHammerhead Part # M150-1032000American Sportworks Part # 14362 Carter Brothers...

(3)-Hammerhead Clutch Rear Pulley, Driven for 150cc, GY6 - M150-1031000

150cc clutch assembly does NOT come with outer drum (part # M150-1032000)  Clutch measurements:Clutch OD: 122mmBell ID: 125mm  DRIVEN PULLEY COMPAssembly includes the pulley and...

(04)-Hammerhead Drive Belt, 743x20x30 Belt for 150cc, GY6 - M150-1033000

Hammerhead 150cc drive belt, series 743 20 30. 743-20-30 CVT belt.  This is a Gates PowerLink 743-20-30 CVT high-quality OEM belt.Works with 125cc-150cc 4-stroke GY6 scooter engines. Also...

(05)-Hammerhead Clutch Roller for 150cc, GY6 - M150-1071002

Hammerhead 150cc Stock Clutch Roller.  Six rollers are used in the 150cc Variator / 150cc Front Clutch, Part # M150-1071000***SOLD INDIVIDUALLY******Price is per 1 roller, 6 rollers does 1...

(06/09)-M150-1004008 M150-1004008, NUT M12**SPECIAL ORDER**

(6)-M150-1004008 M150-1004008, NUT M12**SPECIAL ORDER**

(07)-M150-1040005 M150-1040005, WASHER o12**SPECIAL ORDER**

(7)-M150-1040005 M150-1040005, WASHER o12**SPECIAL ORDER**

(08)-M150-1040007 M150-1040007, NUT COMPRESSOR FLANGE M12**SPECIAL ORDER**

(8)-M150-1040007 M150-1040007, NUT COMPRESSOR FLANGE M12**SPECIAL ORDER**

(09)-Hammerhead Washer, 15.2×29×4 Clutch Washer - 157F.11.502

15.2×29×4 Washer b/w Clutch and Engine for 150ccHammerhead part # 157F.11.502

(10)-Hammerhead Washer, 15.2×29×7.5 Clutch Washer - 157F.11.501

15.2×29×7.5 Washer b/w Clutch and Nut before Belt CoverHammerhead part # 157F.11.501

(01)-Hammerhead Cylinder 150cc, GY6 - M150-1002200

150cc GY6 Cylinder (Sleeve is approximately 2.44" OD.)  57mm Cylinder Head for 150cc GY6 4-stroke QMJ157 engines. Overall Height: 60mm Bore Diameter: 57mm Intake Port Diameter:...

(02)-Hammerhead Cylinder Base Gasket for 150cc, GY6 - M150-3050351

150cc Cylinder Base Gasket / Cylinder base gasket for 150cc engines GASKET-CYLINDER LOWER Hammerhead part # M150-1002001 Hammerhead part # M150-3053051Carter Brothers part # 513-1014 /...

(04)-Hammerhead Tensioner Guide Plate, Tensioner Cam Chain for 150cc, GY6 - M150-1003500

Timing chain tensioner guide plate for 150cc.Hammerhead part # M150-1003500Baja Reaction 150 (2-seats) Part # BR150S-376, BR150S-414Baja Dune 150 Part # DN150-376, DN150-382Carter 150cc vehicles Part...

(05)-Hammerhead Camshaft Chain / Timing Chain for 150cc, GY6 - M150-1005400

Camshaft chain for 150cc / 150cc Timing Chain for all 150cc Gokarts from Hammerhead, Trailmaster and American Landmaster14352 Chain, CamshaftHammerhead part # M150-1005400Polaris part #...

(06)-Hammerhead Timing Chain Guide Plate, Cam Chain Guide for 150cc, GY6 - M150-1002300

150cc Timing Chain Guide PlateHammerhead part # M150-1002300 Baja Reaction 150 (2-seats) Part # BR150S-376, BR150S-414Baja Dune 150 Part # DN150-376, DN150-382Carter 150cc vehicles Part #...

(07)-14559 14559, TENSION ROD FIXED PIN***SPECIAL ORDER***

(7)-14559 14559, TENSION ROD FIXED PIN***SPECIAL ORDER***

(08)-Hammerhead Tensioner, Cam Chain for 150cc, GY6 - M150-1002100

Cam Chain Tensioner Assembly for 150ccDoes not come with o-ring and bolt as parts manual shows.  Comes only as shown in picture.Hammerhead part # M150-1002100 Baja Reaction 150 (2-seats)...

(09)-Hammerhead Tensioner Gasket for 150cc, GY6 - M150-3050347

150cc Tensioner Lifter GasketGY6 Stock Timing Chain Tensioner Gasket GASKET-TENSIONER Hammerhead part # M150-1002002Hammerhead part # M150-3050347Polaris part # 3050347Polaris part # 3050063Baja part...

(12)-Hammerhead Bolt - M6x22 Flange Bolt - 9.106.022 replaces, 152MI-080013, 152MI-022020, 14429-D, 96001-06020-KAT, 50032

Starter motor bolt m6 x 22, Camshaft Holder Bolt and several more applications...Hammerhead part # 9.106.022Hammerhead part # 152MI-080013Hammerhead part # 152MI-022020Hammerhead part...

(01)-Hammerhead Cylinder Head Assembly with Valves for 150cc, GY6 - M150-100-1320-C

This is a 150cc head assy. complete with valves already installed and just needs to be bolted on.  This fits engines that the valve cover is held on by 4 bolts.This is a true plug and play as it...

(02)-Hammerhead Cylinder Head Gasket, Seal for 150cc, GY6 - M150-1001010

Cylinder head gasket for 150ccWorks on all 150cc Hammerhead models as well as American SportWorks, Trailmaster gokarts and Trailmaster 150cc UTVs, etc... GASKET-CYLINDER HEADHammerhead part #...

(03)-Hammerhead Pin, M10x16 Dowel Pin for 150cc, GY6 - M150-1001007

10 x 16 Dowel Pin Size: M10 (Metric 10mm diameter center opening) Height: 16mm Type: Dowel Pin Hammerhead Part # M150-1001007, 152MI-011007Polaris part # 3050047American Sportworks Part # 14266Baja...

(04)-Hammerhead Intake Pipe Manifold for 150cc, GY6 - M150-1001210

Intake manifolds should be inspected and replaced if leaking, cracked, or showing abnormal wear. An air leak through the intake manifold significantly affects the air/fuel mixture, usually resulting...

(05)-Hammerhead O-Ring 27x2 for 150cc, GY6 - M150-1001201

27 x 2 O-ring O-RING-THROTTLE BODY,2X27Hammerhead part # M150-1001201 Polaris part # 5416176American Sportworks Part # 14261Baja Reaction 150 (2-seater model) Part #...

(07)-Hammerhead Intake Pipe Insulator, Intake Pipe Spacer for 150cc, GY6 - M150-1001005

150cc Intake Spacer This is the hard plastic spacer goes below the stock intake manifold on GY6 motors.Insulator IntakeHammerhead part # M150-1001005 Polaris part # 3050048Baja Reaction 150...

(08)-Hammerhead Intake Pipe Spacer Gasket for 150cc, GY6 - M150-3050352

150cc Intake Pipe Spacer Gasket / 150cc Gasket Carburetor InsulatorGasket-Carb InsulatorThis gasket goes between the cylinder head and the intake manifold on GY6 motors.Hammerhad part #...

(09)-Hammerhead Camshaft Seat Holder With Rocker Arms for 150cc, GY6 - M150-1005001-N

150cc Camshaft Holder with Rocker Arms Assembly14356 Cap, Camshaft BRG - 150ccOur Cam holder comes with rocker arms 14356 CAP, CAMSHAFT BRG - 150CC CAMSHAFT HOLDER Hammerhead part #...

(10)-NGK Spark Plug CR7HSA for 150cc - 98056-57713-00 replaces 152.07.200, 50304, 3050051, 513-1077, C7HSA, 4549, 380108

This high quality NGK spark plug is the standard spark plug for your GY6 150cc engine.It's best to keep a few of these on hand for spares or carburetor tuning.When rejetting your carburetor, you'll...

(11)-Hammerhead Bolt, M6x50 Intake Stud for 150cc, GY6 - M150-1001006 replaces 152.11.202, 14264, 3050052

150cc intake stud m6 x 50m6 x 50 intake stud boltThis bolt (you need 2) mounts the intake manifold to the cylinder head. Commonly found in the Cylinder Head Assembly section of many parts manuals...

(12)-Hammerhead Bolt, M6x18 Exhaust Stud / Bolt for 150cc, GY6 - M150-1001011 replaces 152.11.201, 14263

150cc Exhaust Stud / m6 x18 stud for exhaust Exhaust port stud bolts for GY6 engines. Works with 125 or 150cc stock engines that use M6 exhaust stud bolts.  Size: M6 (Metric 6mm...

(13/16)-Hammerhead Bolt, M6x100 Flange Bolt for 150cc, GY6 - M150-1003007 replaces GB/T16674 M6x100, 14338, 50087

M6 x 100 Cylinder Head Bolt / M150-1003007, FLANGE BOLT M6X100 for CYLINDER HEAD Size: M6 (Metric 6mm diameter) Length: 100mm Thread Pitch: 1mm Type: Flanged Price is per bolt BOLT...

(14)-M150-1003004 M150-1003004, WASHER ***SPECIAL ORDER***

(14)-M150-1003004 M150-1003004, WASHER ***SPECIAL ORDER***

(15)-M150-1003003 M150-1003003, FLANGE NUT M8 **SPECIAL ORDER***

(15)-M150-1003003 M150-1003003, FLANGE NUT M8 **SPECIAL ORDER***

(16)-Hammerhead Nut, M6 Flanged ZN.D Nut - 95500-06001-KAS replaces 50024

FLANGE NUT M6-ZN. DHammerhead part # 95500-06001-KASAmerican Landmaster part # 50024

(01)-Hammerhead Valve, Intake Valve for 150cc, GY6 - M150-1001301-N replaces 14267

150cc Intake ValveHammerhead part # M150-1001301-NOld Hammerhead part # M150-1001301

(02)-Hammerhead Valve, Exhaust Valve for 150cc, GY6 - M150-1001307-N replaces 14273

150cc Exhaust Valve Hammerhead part # M150-1001307-N  Old Hammerhead part # M150-1001307 American Landmaster part # 14273

(03)-Hammerhead Seal, Valve Stem Seal for 150cc, GY6 - M150-1001310

150cc Valve Oil Seal / Valve Stem SealHammerhead part # m150-1001310Hammerhead part # 152mi-022500Trailmaster part # 152.12.104American Landmaster part # 14268

(04)-M150-1001302 M150-1001302, SEAT VALVE SPRING OUTER (14269) **SPECIAL ORDER**

(4)-M150-1001302 M150-1001302, SEAT VALVE SPRING OUTER (14269) **SPECIAL ORDER**

(05)-M150-1001303 M150-1001303, SPRING VALVE OUTER, INNER **SPECIAL ORDER***

M150-1001303 M150-1001303, SPRING VALVE OUTER, INNER **SPECIAL ORDER***

(7)-M150-1001305 RETAINER VALVE SPRING ***SPECIAL ORDER***

M150-1001305 RETAINER VALVE SPRING ***SPECIAL ORDER***

(08)-M150-1001306 VALVE RETAINER CLIP (SET INCLUDES 2 CLIPS)**SPECIAL ORDER***

M150-1001306 VALVE RETAINER CLIP (SET INCLUDES 2 CLIPS)**SPECIAL ORDER***