Hammerhead By Polaris

(30) Hammerhead Steering Ball Joint for 150cc / 250cc / 300cc

  PART#S Hammerhead Part # 4.000.008Trailmaster Part # 4.000.008-150XRSCarter Brothers part #  536-3006 / 5363006Metal Motorsports Part # KT04-015 Metal Motorsports ParT # MT04-015

(29) Hammerhead Cotter Pin M2x15

  PART#S Hammerhead part # 9.500.215American Sportworks Part # 14110Carter Brothers part # 500-1072Tomberlin Crossfire Part # 1010647Trailmaster Part # 9.500.215

(27) Hammerhead M10 Lock Washer

Steering Gear Bracket for 150cc / 250cc / 300cc gokartsf10 Lock Washer   PART#S Hammerhead part # 9.400.010 Trailmaster part # 93001000000002American Sportworks Part # 14241Baja Part #...

(26) Hammerhead M10 Flat Washer

Steering Gear Bracket for 150cc / 250cc / 300cc gokartsFlat Washer 10   PART#SAmerican Sportworks Part # 14240Joyner Part # 222.10Carter Bros part # 500-3025SunL SLGK-250-2A Part # GB97...

(25) Hammerhead Tie Rod End

The tie rod end attaches the tie rod to the strut. This tie rod end is used on nearly all Hammerhead 150cc and 250cc buggies, except for the GTS 250 which uses part # 6.000.062-250.**Some...

(24) Hammerhead Tie Rod 5.5"

5.5" long tube threaded (M8) on both ends. one end is a right-hand threaded and the other end is left-hand threaded.Hammerehad part # 8.010.157-GTS

(23) Hammerhead Steering Gear

The steering stem is set at a 45 degree wide angle to body.  Body is roughly 13" wide.  This Steering Gear fits nearly all 150s and 250s.Please double check pictures before ordering. ...

(22) Hammerhead Steering Gear Bracket for 150cc / 250cc / 300cc

Steering Gear Bracket for 150cc / 250cc / 300cc gokartsSteering Gear Bracket for LE 150.  Bracket for part # 4.000.008-250 on LE 150   PART#SHammerhead part # H5260000Hammerhead part...

(19) Hammerhead Rubber Dust Cover for Steering Ball Joint

Dust Cover for most 150cc and 250cc karts / Rubber Boot for Rack and Pinion SteeringUsed on American SportWorks Go-Kart Model 7150 & 200 Series Light Utility VehilceRoughly 4" long from end to...

(18) Hammerhead Steering Knuckle Dust Cover

Dust Cover for the steering knuckle for steering column for nearly all 150cc and 250cc gokarts.Seal - Steering Shaft Boot   PART#SHammerhead part # 7.020.066American SportWorks part #...

(16) Hammerhead M8x25 Flange Bolt

This M8x25 Washer Bolt is often found on many 150cc and 250cc buggies in the Steering Shaft Assembly and  Rear Cargo Rack areas. Often used to secure fuel tanks to the chassis. Size: M8 (Metric...

(08) Hammerhead 12x16x12 Suspension Arm Bushing

These are the bushings used on the front suspension a-arms for most kart models. Each suspension arm uses two bushing (one per side).These bushings can also be used as pedal bushings on the 80T,...