Hammerhead By Polaris

(18) Hammerhead M6x24 Spindle Pin / Brake Block Pin

F6 * 24 Pin that connects spindle pin bracket (part # 8.030.024) to brake pedalHammerhead part # 9.700.624American Landmaster part # 14116Carter Brothers part # 500-1042Polaris part # H7660004

(15) Hammerhead Brake Pedal Rubber, Black Pad for 150cc / 250cc / 300cc

Brake Pedal pad for nearly all Hammerhead 150s and 250s.  Should work for most karts out there.  This goes over the brake pedal itself, part # 4.000.015Hammerhead part # 7.020...

(13) Hammerhead M8x222 Brake Pedal Bolt

m8x1.25x222 Bolt Size: M8 (Metric 10mm diameter) Length: 222mm Thread Pitch: 1.25mm Type: Brake Pedal Price is per bolt Hammerhead part # 9.708.222Polaris part # 205043007Carter Brothers part...

(12) Hammerhead Spring, Brake Return Spring for 150cc / 250cc / 300cc

150cc Brake Pedal Return Spring / 250cc Brake Pedal Return SpringWorks for nearly all Hammerhead 150-250cc vehicles and Trailmaster 150cc - 300cc vehiclesHammerhad part # 8.040.007Carter Brothers...

(08) Hammerhead M2x12 Cotter Pin 2 x 12

2 x 12 Cotter Pin for Pin, Figure 17-38Hammerhead part # 9.500.212Carter Bros GSR, GSX 150 part # 500-1003Tomberlin Crossfire Part # 1010647Trailmaster Part # 9.500.212

(07) Hammerhead Bracket, Spindle Pin Bracket / T-Block

T bracket that connects the spindle pins (8.010.081) to brake pedal.  T Block, Brake CAST-COUPLER,BRAKE,PUSH RODHammerhead part # 8.030.024American Sportworks part # 14101Trailmaster Part # 8...

(04) Hammerhead Nut, M8 Non-Locking Nut

M8 Nut that works with spindle pin (part # 8.010.081)Hammerhead part # 9.200.008Polaris part # 7547076

(03) Hammerhead Pin, Spindle Pin

Spindle pin that compresses master cylinder plunger Type: Pin/bolt Size: ~50mm length, M8 diameter. Price is per item 14117, pushrod, brake adjust Hammerhead part # 8.010.081American Landmaster...

(02) Hammerhead Bolt, M8x35 Flange Bolt

M8 x 1.25 x 35 Bolt that holds brake brake master cylinder to frame (part # 6.000.076) Size: M8 (Metric 8mm diameter) Length: 35mm Thread Pitch: 1.25mm Type: Hex Washer Head Price is per bolt

(01) Hammerhead Bracket, Master Cylinder Protector for 150cc / 250cc / 300cc

Master Cyclinder protection bracket that will help protect the master cylinder on your gokart.Hammerhead part # 8.070.044Polaris part # 303044022

(13) Hammerhead Nut M5

SEE PARTS DIAGRAM LINK

(12) Hammerhead Manual Choke Cable 48" for 150cc

Manual choke cable for all Hammerhead 150cc models, including R-150 UTV.  This choke cable is only installed on 2017 and newer Hammerhead 150cc models.  If you want to convert your old...