Hammerhead By Polaris

(03) Hammerhead Oil Filter Screen for 150cc, GY6

150cc Oil Filter Screen / 150cc Oil Screen  OIL FILTER SCREEN Hammerhead Part # m150-1003120American SportWorks part # 14329Trailmaster part # 152.09.003-OSPolaris part # 3050083

(02) Hammerhead Crankcase Cover Gasket for 150cc, GY6

Crankcase cover gasket is needed when replacing the starter clutch (part # M150-1060001) Starter Clutch Gasket Outer Crankcase gasket Hammerhead Part # M150-1003013 American SportWorks part #...

(01) Hammerhead Crankcase Cover, Outer for 150cc, GY6

150cc Crankcase cover, outer crankcase RH 150ccRight Crankcase Cover used in most all vehicles that have a GY6 150cc engine.Hammerhead part # M150-1003101 Hammerhead part #...

(29/02) Hammerhead Bolt, M6x18 Flange Bolt

This M6x18 Flanged Bolt is most often found on many buggies and scooters near the Magneto Stator area. It can also be found in the Cylinder Body area of CN250 and CF250 engines, used to secure the...

(28/09/05) Hammerhead Pin, M8x14 Dowel Pin for 150cc, GY6

8 x 14 Dowel Pin Size: M8 (Metric 8mm diameter center opening) Height: 14mm Type: Dowel Pin Hammerhead Part # M150-1003005American Landmaster part # 50016

(27) Hammerhead Bolt, M8x195.5 Stud Bolt for 150cc, GY6

M8 x 195.5 Stud Bolt for Cylinder Size: M8 (Metric 8mm diameter) Length: 195.5mm Thread Pitch: 1.25mm Type: Stud Price is per bolt Hammerhead part # M150-1003002American Sportworks Part #...

(26) Hammerhead Bolt, M8x187.5 Stud Bolt for 150cc, GY6

M8 x 187.5 Stud Bolt for Cylinder  Size: M8 (Metric 8mm diameter) Length: 187.5mm Thread Pitch: 1.25mm Type: Stud Price is per bolt Hammerhead part # M150-1003001 American Sportworks Part...

(25) Hammerhead Damping Bushing / Engine Hanger Bushing, Rubber for 150cc, GY6

This engine mount bushing is for a GY6 125-150cc engine.  GY6 Crankcase Front Engine Mount Bushing Outer Diameter: 28mm Length: 22mm ID: 10mm Hammerhead part # m150-1003320 American...

(24) Hammerhead Bolt, M6x50 Flange Bolt

M6 x 50 Crankcase Bolt Size: M6 (Metric 6mm diameter) Length: 50mm Thread Pitch: 1mm Type: Flanged Price is per bolt Hammerhead part # M150-1003032Hammerhead part # 152MI-013010American Landmaster...

(23) Hammerhead Bolt, M6x12 Flange Bolt

M6 x 12 bolt - flange bolt Size: M6 (Metric 6mm diameter) Length: 12mm Thread Pitch: 1mm Type: Flanged head Price is per bolt SCR-HXFL-M6X1.0X12 8.8 ZOD P30 Hammerhead Part # 9.106...

(22) Hammerhead Washer, M6 Flat Washer

Flat Washer 66mm is the diameter of the center openingHammerhead part # 9.300.006Hammerhead part # CF188-065206American Landmaster part # 14315

(21) Hammerhead Ball Bearing 6202

E6202 Radial Ball Bearing BALL BEARING 6202 Hammerhead part # 91004-E6202-KAT Hammerhead part # Y00055Trailmaster part # GB/T276 6202 American Landmaster part # 14149Polaris part # 3050324

(15/20) Hammerhead Ball Bearing 6204

E6204 Radial Ball Bearing BALL BEARING 6204Hammerhead part # 91004-E6204-KAT Hammerhead part # 82407Trailmaster part # GB/T276 6204  Polaris part # 3050323

(19) Hammerhead Ball Bearing 6203

E6203 Radial Ball Bearing BALL BEARING 6203 Hammerhead part # 91004-E6203-KAT American SportWorks part # 50102Trailmaster part # GB/T276 6203Polaris part # 3050322

(18) Hammerhead Shift Detent Ball for 150cc with F/N/R

Ball, Shift Indent / STEEL BALL Φ9.5Hammerhead part # 14309Trailmaster part # GB/T308 09.5Polaris part # 3050035

(17) Hammerhead Spring, Shift Indent Spring for 150cc with F/N/R

Spring for 150cc F/N/R transmissionShifting Drum Positioning SpringHammerhead part # 14310Trailmaster part # 157F.10.410Polaris part # 3050034

(16) Hammerhead Washer, M14.2x22x1.3 Washer

M14.2 x 22 x 1.3 Washer

(15) Hammerhead Bolt, M14x20.8 Locating Bolt for 150cc with F/N/R

Shift Detent Bolt for 150cc.  Hammerhead part # 14312American SportWorks part # 14312

(14/31) Hammerhead Bolt, M12x1.5 Transmission Fill / Drain Bolt

m12 x 1.5 Transmission Fill/Drain Bolt for 150cc.  Hammerhead part # 14313Hammerhead part # M150-1003018American Landmaster part # 14313American Landmaster part # 14288Trailmaster part...

(13/30) Hammerhead Washer, M12 Washer for Fill / Drain Bolt

Fill / Drain Bolt Washer 12 for transmission fill bolt14314, Gasket, Trans Drain Plug - 150cc Hammerhead part # 14314American Ladnmaster part # 14314Trailmaster part # GB97.1 12

(11) Hammerhead Breather Tube, Crankcase Vent Tube for 150cc

Breather tube for 150cc with F/N/R.  Hammerhead part # 14307

(08) Hammerhead Oil Seal (20x32x6)

Oil Seal 20 x 32 x 6OIL SEAL 20X32X6Hammerhead part # M150-1042000Polaris part # 3050026 American Sportworks part # 14290 Baja Reaction 150 (2-seats) - BR150S-481Baja Reaction 150 (Bench Seat) -...

(07/08) Hammerhead Oil Seal (19.8x30x5)

19.8 x 30 x 5 Oil SealOIL SEAL 19.8X30X5The GY6 150cc motor uses a total of two 19.8x30x5 oil seals - one at each end of the crankshaft.Hammerhead part # M150-1003110Hammerhead part #...

(06) Hammerhead O-Ring (6x1.8) for 150cc, GY6

6 x 1.8 O-ringM6x1.8 O-ring O-RING-THROTTLE BODY,2X27Hammerhead part # 14285

(05) Hammerhead O-Ring (107x2) for 150cc, GY6

m107 x 2 O-ring for small left cover, part # 14283, on crankcase for F/N/R 150ccHammerhead part # 14284Polaris part # 3050023 O-RING 107X2

(04) Cover

Small cover behind the variator on 150cc engines with F/N/R.  The o-ring for this part is part #14284.  This is only for the motors with F/N/R.This part is associated with the left-side...

(03) Hammerhead Crankcase Gasket for 150cc, GY6

Crankcase gasket for 150cc, this gasket is only used when the case is split apartGasket - CrankcaseHammerhead part # m150-1003014Carter Brothers part # 513-1025 / 5131025American SportWorks part #...

(03) Hammerhead Chain, Oil Pump Chain for 150cc, GY6

150cc Oil Pump Chain with 22 LinksChain-oil pumpHammerhead part # m150-1021000American Sportworks part # 14357Polaris part # 3050072 part # BN157QMJ-1400003

(02) Hammerhead Sprocket, 23T Oil Pump Sprocket / Oil Pump Gear for 150cc, GY6

Oil Pump Drive Sprocket for GY6 motors. This part is commonly found on GY6 150cc buggies in the Oil Pump Assembly section of the owner's manual. This item is used as the sprocket that goes with the...

(01) Hammerhead Oil Pump Assembly for 150cc, GY6

150cc oil pump assembly Bolt Hole Spacing: 33.3mm Outer Diameter: 46.5mm Hammerhead part # m150-1022000Old TJ Power Sports #  7.190.009, 12.021.013 Baja Part # BR150S-470Baja...

(06) Hammerhead Piston Ring Set for 150cc, GY6

OEM Piston Ring set for 150cc GY6 4-stroke QMI157 / QMJ157 engines Thin Ring Thickness: 0.4mm Thin Ring Width: 1.8mm Middle Oil Ring Thickness: 1.8mm Piston Ring Inner Diameter : 56mm Hammerhead...

(05) Hammerhead Piston Pin Clip for 150cc, GY6

***SOLD INDIVIDUALLY***Hammerhead part # M150-1004003Trailmaster part #  152.01.307Carter Brothers Part # 515-1035American Landmaster Part # 14345

(04) Hammerhead Piston Pin for 150cc, GY6

Hammerhead OEM 150cc Piston Wrist Pin Hammerhead part # M150-1004006American Landmaster part # 14346Trailmaster part # 157.01.306

(03) Hammerhead Piston for 150cc, GY6

Hammerhead OEM 150cc Piston, 57.4mmHammerhead part # M150-1004001American Landmaster part # 14347Trailmaster part # 157.01.301

(02) Hammerhead Key, M4x14 Woodruff Key for 150cc, GY6

This the stock crankshaft woodruff key for 125 and 150cc GY6 engines used in many buggies, ATVs, and scooters. WOODRUFF KEY 4X14 Hammerhead part # m150-1004002Hammerhead part # m150-1004005Polaris...

(1)-Hammerhead Seat Back Cushion, Seat Back for GTS 150 / Platinum GTS 150 - 13-0401-01

GTS150 back portion of seat ONLY with logo engraved in seat.  This is the back portion of the seat with the Hammerhead logo embedded into it.  This seat back can retro fit into any...

(2)-Hammerhead Seat Cushion, Right (Passenger) Seat Bottom for GTS 150 / Platinum GTS 150 - 13-0401-01R

GTS150 bottom portion of seat ONLY for passenger (RIGHT) side.  This is the bottom portion of the seat that is the fixed seat and is not adjustable.  This seat bottom can retro fit into any...

(3)-Hammerhead Seat Cushion, Left (Driver) Seat Bottom for GTS 150 / Platinum GTS 150 - 13-0401-01L

GTS150 bottom portion of seat ONLY for driver (LEFT) side.  This is the bottom portion of the seat that comes with slides so it is adjustable.  This seat bottom can retro fit into any...

(4)-Hammerhead Bolt, M8x40 Special "T" Seat Rail Bolt - 9.900.840

Seat Rail Bolt, Bolt Sharp M8 x 1.25 x 40SCR-M8X1.25X40,DAC (H7510011) M8 X 1.25 X 40 "T" STYLE DACHammerhead Part # 9.900.840Trailmaster part # 57870804012505, 9.108.045American Landmaster...

(5)-Hammerhead Seat Rail Set for 150cc / 250cc / 300cc 6.000.057

Seat Rail Set for 150cc, 250cc, 300cc gokarts.  This set comes with both rails, including the one with the grab handle.  Hammerhead part # 6.000.057Hammerhead part # 6.000...

(6)-Hammerhead Nut, M8 Locking Flange Nut - 9.220.008

m8 Locking Flange Nut Size: M8 (Metric 8mm diameter center opening) Height: ~7mm Thread Pitch: 1.25mm Price is per piece Hammerhead Part # 9.220.008Hammerhead Part # 6.034.096Hammerhead Part # 7...

(7)-Hammerhead Racing Seat Belt, 5-Point with Metal Latch and Link for Platinum GTS 150 - 6.000.354-P

Racing-style 5-point safety harness system with a metal latch and link clasp.  This seat belt is used on the Platinum GTS150, but can interchange with any 5-point seat belt assembly...

(7)-Hammerhead Seat Belt Assembly 5-Point - 6.000.354

Five-Point Safety Harness Seat Belt for GT250, GT150, GTS250 or GTS150 Hammerhead Go-Kart or any kart that uses a Five-Point Seat belt. Seat Belt - Complete Includes Both Driver and Passenger...

(8)-Hammerhead Bolt, M7/16"x28 Special Bolt - 9.700.001

m7/16x28 Special Bolt for SeatbeltHammerhead Part # 9.700.001 

(9)-Hammerhead Washer, 7/16 Washer - 9.700.002

Washer 7/16 Hammerhead Part # 9.700.002 American Sportworks Part # 14289Baja Reaction 150 (2-seater model) Part # BR150S-187Baja Reaction 250 Part # BR150S-221Baja Dune 150 Part #...

(10)-Hammerhead Washer, 7/16 Lock Washer - 9.700.005

Lock Washer 7/16Used with seat belt hardware Hammerhead part # 9.700.005

(11)-Hammerhead Nut, 7/16 Nut - 9.700.003

Belt Nut M7/16 for SeatbeltHammerhead Part # 9.700.003

(12/04)-Hammerhead Bolt - M8x40 Flange Bolt - 9.108.040

M8x1.25x40 bolt.  M8 x 1.25 x 40 bolt Size: M8 (Metric 8mm diameter) Length: 40mm Thread Pitch: 1.25mm Type: Hex Washer Head Price is per bolt Hammerhead part # 9.108.040Hammerhead part # 9...

(01)-Hammerhead Bolt, M6x16 Flange Bolt - 9.106.016

150cc starter motor bolt m6x16bolt flange m6x16 Size: M6 (Metric 6mm diameter) Length: 16mm Thread Pitch: 1mm Price is per bolt m6x16 Flange BoltCommonly used for 150cc starter motorHammerhead part...

(02/05)-Hammerhead Nut, M6 Locking Flange Nut - 9.220.006

M6 Locking Flange Nut Size: M6 (Metric 6mm diameter center opening) Height: ~7mm Thread Pitch: 1mm Price is per piece Hammerhead Part # 9.220.006 Hammerhead Part # 9.210.006 Hammerhead...

(3)-Hammerhead Fender, 17" x 7.5" Three Bolt Holes Fender for Mudhead 208R / 150cc / 250cc / 300cc - 7.010.034-SS replaces 15206, 7.010.034, 17-0211-00

These fenders are used on all four wheels for the MudHead and used as front fenders on other 150cc and 250cc go-karts 7.5" wide and 17" long This is the fender for Mudhead / 208R for all...

(4)-Hammerhead Fender Bracket Double-Bolt Strut Mount, Silver, Front Right (Passenger) for 150cc / 250cc / 300cc - 13-0625-01R

This bracket has a TWO bolt mount to strut.  This is the bracket that is used on all 2017 GTS models and newer.  For Single Bolt mount to strut, please use part # 6.000.102-SRight /...