(13) Hammerhead Horn

Horn that works on either side and is used on all TrailMaster and Hammerhead karts.Only one horn is shipped, even though some images might show two. PRICE IS PER HORN!   Hammerhead part # 6.000.174 Old Hammerhead part # 6.000.135Old Hammerehad...

(12) Hammerhead Rubber Plug

SEE DIAGRAM PAGE 33

(11) Hammerhead Power Outlet,12-Volt

12-volt Auxiliary Power Outlet that goes into dash.  OEM 12V Power Outlet for the power outlet on the dashboard panel for Hammerhead 150, 250, and 300cc buggies. This is a power outlet used for accessories with many buggy models.Car Cigarette...

(09) Hammerhead Control Relay

Control Relay located in dash.  SKU# 15016 Brake interlock RelayRelay/Safety switch used on the 200 Series Light Utility VehiclesAlso used on the YS36 Electric Light Utility Vehcles by American LandMaster   Hammerhead part # 6.000...

(08) Hammerhead Dash Board / Switch Panel Cover

Switch panel cover for GTS150s with Forward / Neutral / Reverse (F/N/R)Switch cover panel for SS250 and GTS250.   This GTS150 dash works for GTS with keyed ignition. Switch panel cover for GTS150 / Dash for GTS150 with F/N/RFor GTS150 with push...

(07) Hammerhead Ignition Switch

Standard three wire ignition key switch. This 3wire key switch will work on several go-kart models including the SS150, new-style GTS150 w/ internal reverse, and the GTS250.This 3-wire ignition switch is also used on all American SportWorks 150cc gokarts...

(06) Hammerhead Engine Stop Button, Kill Switch

Engine kill button that snaps into dash to shut off engine immediately when pushed.Used on most all 150cc karts and 250cc karts.  Does NOT work for R-150 or GL 150.Hammerhead part # 6.000.159 Carter Brothers part # 609-0006Hammerhead part # 6...

(05) Hammerhead Headlight Switch

Headlight switch used for single-beam headlightsHead light on/off switch for lights without hi/lo beamHammerhead part # 6.000.058 Hammerhead part # 16-0320-00 American SportWorks part # 14220

(04) Hammerhead Horn Button

This is the horn switch that snaps into the dash for horns.  This horn button measures roughly 1 and 1/4"This horn switch is use on the Hammerhead and Trailmaster 150cc and 250cc and 300cc Models.It is also used on the Hammerhead 80T and mid...

(03) Hammerhead Rubber Plug for 12-Volt Outlet

Rubber Plug for Power Outlet in dashCar Cigarette Lighter PlugHammerhead part # 7.020.051 Polaris part # 208037027American Sportworks part # 14914

(02) Hammerhead Screw Cover

Rubber Screw Cover / Rubber Bolt CoverUsed on Dash and Electrical CoverHammerhead part # 7.010.061Polaris part # 5455568

(01) Hammerhead Speedometer for GTS 150 / Platinum GTS 150

Hammerhead GTS 150 Speedometer / Trailmaster 150 XRX speedometer / American Sportworks 7150 SpeedometerHas Left and Right turn signal indicators as well as a hi/low beam indicator.Trailmaster 150 XRX speedometer / Trailmaster 300 XRX...

(17) Hammerhead Valve Stem

Valve Stem for WheelHammerhead part # 7.190.018

(16) Hammerhead M14 Flat Washer

WASHER. FLAT 1414mm is the opening of the center holeHammerhead part # 9.300.014Old Hammerhead part # 14690 

(15) Hammerhead CST Tire 19x7x8 Hammerhead Shark Tread, Front Tire

These front tires are used on 2017 and Newer Hammerhead GoKarts. 19x7-8 Tire Hammerhead Shark Tread Design Tubeless 19" Tall 7" Wide Used on 8" Wheel CU909 Hammerhead Off-Road Part # 001-190708-01Polaris part # 201282011

(14) Hammerhead Hub Cover

Dust cover for Hub for nearly all Hammerhead makes and models.  Works on both front and rear hubs.   Sold individuallyHammerhead part # 7.020.039Hammerhead part # 15.005.001 Carter Brothers part # 520-3004American SportWorks part #...

(13) Hammerhead M2x20 Cotter Pin

Cotter Pin that secures the castle nut Type: Cotter Pin Size: 2mm x 20mm length Price is per item Hammerhead part # 9.500.220American Sportworks Part # 14150Baja Reaction 150 (2-seater model) Part # BR150S-227Joyner Viper 150 Part # GB/T91-1986...

(12) Hammerhead M14 Castle Nut

M14 castle nut used for front spindles  SIze: M14 (Metric 14mm center) Thread Pitch: 1.5mm Price is per item Hammerhead part # 9.800.014 Old Hammerhead part # 14727American Landmaster part # 14727Baja Reaction 150 & 250 Part #...

(10) CST Tire/Wheel Assembly 19x7x8, Front, Left (Driver), Aluminum Wheel, Hammerhead Shark Tread

CSTHAMMERHEAD SHARK TREADALUMINUM WHEEL19 x 7 - 8Front Left Tire and Wheel assembly for Platinum GTS150 (2017 and newer)Driver Front Tire and Wheel Assembly for Platinum GTS 150 (2017 and newer)Hammerhead Part # 24-0901-01Polaris part # H1520003

(10) Hammerhead CST Tire/Wheel Assembly 19x7x8, Front, Left (Driver, Black Wheel, Hammerhead Shark Tread

CSTHAMMERHEAD SHARK TREADBLACK WHEEL19 x 7 - 8Front Left Tire and Wheel assembly for GTS150 (2017 and newer)Driver Front Tire and Wheel Assembly for GTS 150 (2017 and newer)

(09) Hammerhead Bearing 6202-Z, Outer Hub Bearing

Outer front hub bearing used on all Hammerhead 150cc and 250cc vehicles.  Also used on 150X/300X kartsInner front bearing used on all Mudhead / Mid-size kartsAlso used as inner bearing on the Trailmaster mini and mid karts. Outer Diameter:...

(08) Hammerhead Front Hub

Front hub used on many Chinese 150cc/ 250cc/300 go-karts ( TrailMaster, Hammerhead, Carter, American Sportworks).  Does not work with Yerfdog or Kandi karts. Bolt pattern is 110mm, 10mm nuts not included. Hub comes does not come with bearings...

(07) Hammerhead M10x31 Wheel Stud

m10x1.25x31 wheel stud bolt for the hub.  This is as the bolt that fastens through the wheel hub to become the stud bolts for mounting the wheel/tire.   Size: M10 (Metric 10mm diameter) Length: 31mm Thread Pitch: 1.25mm Type: Hex Washer...

(06) Hammerhead Bearing 6204-Z, Inner Hub Bearing

This 6204z sealed bearing is used on all hammerhead 150cc and 250cc model.  This bearing is most commonly used as an inner front hub bearing   Hammerehad Part # 9.030.002-zHammerhead Part # 9.030.002American SportWorks Part # 14146 / 14146...