Rear Axle Assembly

(02) Hammerhead Cover, Bearing Housing Base

Flange Bearing Cover for 150cc that replaces part # 8.020.028 on 2018 and newer 150ccBearing Base Cover for rear axle bearings on 150cc swingarm fo 2018 and newer GTS / Platinum models.   Hammerhead part # 13-1519-01

(03) Hammerhead Bearing 6206-Z Rear Axle Bearing

Rear axle bearing for both the 150cc and 250cc Hammerhead vehicles.   OD: 52mm ID: 26mm Thickness: 16mm Sealed Bearing 6206-2RZ     Hammerhead part # 9.030.006Hammerhead part # 010-62062-01Hammerhead Part # 9.030.006Old TJ Power Sports...

(04) Hammerhead Bearing Housing, Rear

This is the housing used to hold the axle bearing to the rear swing arm.  Two housings are used per rear swingarm with one housing for each side of unit.     Hammerhead part # 8.030.008Hammerhead part # 8.030.033American SportWorks...

(06) Hammerhead Brake Disc Rear for 150cc / 250cc / 300cc

This rear disc brake is used on all Hammerhead 150s and 250s Works with most 150cc and 250cc buggies, regardless of vehicle brand Used on all Hammerhead 150cc and 250cc buggies Has a mounting hole for models with a speedometer magnet, but can still be...

(07) Hammerhead Axle for 150cc (2018 and Newer)

Rear axle for all 2018 and newer Hammerhead GTS150s and PLATINUM GTS150s with Forward / Neutral / Reverse.  Please check measurements before ordering.  This rear axle does NOT work for the 2017 and older 150cc gokarts...

(08) Hammerhead M8x22 Flange Bolt

Bolt, M8 X 1.25 X 22 FHCS DAC Size: M8 (Metric 8mm diameter) Length: 22mm Thread Pitch: 1.25mm Type: Hex Washer Head Price is per bolt     Hammerhead part # 9.108.022American SportWorks part # 14435 Carter Brothers part #...

(09) Hammerhead Magnet, Speed Sensor

Magnet for speed sensor. The Speed sensor (part # 6.000.268) and screw (part # 9.600.308) are NOT included.   Hammerhead Part # 7.050.001Old TJ Power Sports Part # 7.190.013American SportWorks Part # 14488 

(10) Hammerhead Screw Pan M3x8

Phillip Screw m3 x 8 Screw Pan that holds the magnet (7.050.001) in place Size: M3 (Metric 3mm diameter) Length: 8mm Type: Pan-head Price is per bolt         Hammerhead part # 9.600.308Old Hammerhead part # 9.103.005Old Hammerhead...

(11) Hammerhead M8x27 Flange Bolt

m8 x 1.25 x 27 bolt, commonly used for sprocket Size: M8 (Metric 8mm diameter) Length: 27mm Thread Pitch: 1.25mm Type: Hex Washer Head Price is per bolt     Hammerhead part # 9.108.027Carter Brothers part # 500-1027Trailmaster Part # 9.108...

(12) Hammerhead Rear Axle Sprocket 39T

39 Tooth Torque Sprocket / 39 Tooth Axle Sprocket 4 bolt pattern measures 3 1/8" center hole is 2 5/16" outer diameter is 8" Uses #50 chain 5/8 pitch. If you have a 31-32 Tooth Sprocket it is recommended to replace the sprocket to this 39 Tooth...

(13) Hammerhead Left (Driver) Side on Axle Bearing Housing

This is the housing used to hold the axle bearing to the rear swing arm on the left hand side for 2018 Platinum and GTS 150 models..  Two housings are used per rear swingarm with one housing for each side of unit.  This housing is for the left,...

(14) Hammerhead Sealed Bearing for Axle Bearing 3206-2RZ

Sealed Bearing 3206-2RZ for Left Side Axle on 2018 GTS and 2018 Platinum GTS     Hammerhead part # 010-32062-01

(15) Hammerhead M30x2 Circlip

M30x2 Circlip used on 2018 and newer 150cc axle     Hammerhead part # 016-30020-01

(17) Hammerhead Drive Chain, 530x28L

Drive chain that comes with the master link for most 150cc and 250cc KartsFor 2016 and Older GTS 150 with F/N/R please use 9.070.002-N (with 32 Tooth sprocket)This chain WILL work For 2017 and newer GTS150s with F/N/R (with 39 Tooth...