(11) Hammerhead M6x25 Flange Bolt

M6 x 25 bolt for 150cc fan/shroudM6 x 25 Flange Bolt for 250cc Cylinder headM6 x 25 bolt that is also used in several other places.  Also, this part number is under several different part numbers.   Size: M6 (Metric 6mm diameter) Length:...

(08) Hammerhead Rectifier-Regulator

This is the stock regulator used on all Hammerhead 150cc models and most American Sportworks 150cc karts.  This is the stock regulator that works on nearly all 150cc go karts, including Trailmaster, American SportWorks and Hammerhead.  This...

(06) Hammerhead Starter Relay

Starting relay or solenoid that is used on all Hammerhead 150 and 250 models (except GT250).This starter relay is also used on most Carter Brothers and American Sportworks150cc go-karts and probably most other go-karts out there.Hammerhead Part # 6.000...

(05) Hammerhead CDI

CDI that is used on all 2017 and newer Hammerhead 150cc GOKART models.  This CDI has a 7500 RPM maximum limit.  This will NOT work for the 6.000.267 and ONLY works on 2017 and newer GTS150s, Platinum and other new 150cc models.  Please...

(04) Hammerhead Electrical Box Cover

Electrical Box Cover for most 150 and 250 karts.  Please note that htis electrical cover does not fit every go-kart model.  Some of the new electrical covers now have an on/off switch   Square-ish cover for use with most 150cc and 250cc...

(03) Hammerhead M6x55 Pan Screw

Bolts for electric cover / Screw pan m6x55 Size: M6 (Metric 6mm diameter) Length: 55mm Type: Pan-head Price is per bolt     Hammerhead part # 9.600.655 American Sportworks part # 14431Baja part # BR250-133

(01) Hammerhead Wiring Harness

GTS 150 Wiring Harness withOUT turn signal connectors. This wiring harness only works for the GTS 150 with a NEUTRAL position (Forward/Neutral/Reverse). Hammerhead started using this wiring harness for 2017 and newer GTS. Before 2017 the GTS 150 used...

(13) Hammerhead Horn

Horn that works on either side and is used on all TrailMaster and Hammerhead karts.Only one horn is shipped, even though some images might show two. PRICE IS PER HORN!   Hammerhead part # 6.000.174 Old Hammerhead part # 6.000.135Old Hammerehad...

(12) Hammerhead Rubber Plug

SEE DIAGRAM PAGE 33

(11) Hammerhead Power Outlet,12-Volt

12-volt Auxiliary Power Outlet that goes into dash.  OEM 12V Power Outlet for the power outlet on the dashboard panel for Hammerhead 150, 250, and 300cc buggies. This is a power outlet used for accessories with many buggy models.Car Cigarette...

(09) Hammerhead Control Relay

Control Relay located in dash.  SKU# 15016 Brake interlock RelayRelay/Safety switch used on the 200 Series Light Utility VehiclesAlso used on the YS36 Electric Light Utility Vehcles by American LandMaster   Hammerhead part # 6.000...

(08) Hammerhead Dash Board / Switch Panel Cover

Switch panel cover for GTS150s with Forward / Neutral / Reverse (F/N/R)Switch cover panel for SS250 and GTS250.   This GTS150 dash works for GTS with keyed ignition. Switch panel cover for GTS150 / Dash for GTS150 with F/N/RFor GTS150 with push...

(07) Hammerhead Ignition Switch

Standard three wire ignition key switch. This 3wire key switch will work on several go-kart models including the SS150, new-style GTS150 w/ internal reverse, and the GTS250.This 3-wire ignition switch is also used on all American SportWorks 150cc gokarts...

(06) Hammerhead Engine Stop Button, Kill Switch

Engine kill button that snaps into dash to shut off engine immediately when pushed.Used on most all 150cc karts and 250cc karts.  Does NOT work for R-150 or GL 150.Hammerhead part # 6.000.159 Carter Brothers part # 609-0006Hammerhead part # 6...

(05) Hammerhead Headlight Switch

Headlight switch used for single-beam headlightsHead light on/off switch for lights without hi/lo beamHammerhead part # 6.000.058 Hammerhead part # 16-0320-00 American SportWorks part # 14220

(04) Hammerhead Horn Button

This is the horn switch that snaps into the dash for horns.  This horn button measures roughly 1 and 1/4"This horn switch is use on the Hammerhead and Trailmaster 150cc and 250cc and 300cc Models.It is also used on the Hammerhead 80T and mid...

(03) Hammerhead Rubber Plug for 12-Volt Outlet

Rubber Plug for Power Outlet in dashCar Cigarette Lighter PlugHammerhead part # 7.020.051 Polaris part # 208037027American Sportworks part # 14914

(02) Hammerhead Screw Cover

Rubber Screw Cover / Rubber Bolt CoverUsed on Dash and Electrical CoverHammerhead part # 7.010.061Polaris part # 5455568

(01) Hammerhead Speedometer for GTS 150 / Platinum GTS 150

Hammerhead GTS 150 Speedometer / Trailmaster 150 XRX speedometer / American Sportworks 7150 SpeedometerHas Left and Right turn signal indicators as well as a hi/low beam indicator.Trailmaster 150 XRX speedometer / Trailmaster 300 XRX...

(17) Hammerhead Valve Stem

Valve Stem for WheelHammerhead part # 7.190.018

(16) Hammerhead M14 Flat Washer

WASHER. FLAT 1414mm is the opening of the center holeHammerhead part # 9.300.014Old Hammerhead part # 14690 

(15) Hammerhead CST Tire 19x7x8 Hammerhead Shark Tread, Front Tire

These front tires are used on 2017 and Newer Hammerhead GoKarts. 19x7-8 Tire Hammerhead Shark Tread Design Tubeless 19" Tall 7" Wide Used on 8" Wheel CU909 Hammerhead Off-Road Part # 001-190708-01Polaris part # 201282011

(14) Hammerhead Hub Cover

Dust cover for Hub for nearly all Hammerhead makes and models.  Works on both front and rear hubs.   Sold individuallyHammerhead part # 7.020.039Hammerhead part # 15.005.001 Carter Brothers part # 520-3004American SportWorks part #...

(13) Hammerhead M2x20 Cotter Pin

Cotter Pin that secures the castle nut Type: Cotter Pin Size: 2mm x 20mm length Price is per item Hammerhead part # 9.500.220American Sportworks Part # 14150Baja Reaction 150 (2-seater model) Part # BR150S-227Joyner Viper 150 Part # GB/T91-1986...