(15) Hammerhead M8x12 Allen Bolt

m8 x 1.25 x 12 allen bolt Size: M8 (Metric 8mm diameter) Length: 12mm Thread Pitch: 1.25mm Type: Allen Head Price is per bolt Bolt for brake caliper   PART#SHammerhead part # 9.908.012 Hammerhead part # 9.108.012Polaris part # 7520700

(14) Hammerhead M8x100 Hex Bolt for 150cc Rear Brake Caliper

Bolt most commonly used to hold 150cc rear brake caliper Size: M8 (Metric 8mm diameter) Length: 100mm Thread Pitch: 1.25mm Type: Hex Washer Head Price is per bolt PART#S Hammerhead part # 9.108.100Old Hammerhead part # 9.908.100American Sportworks...

(12) Hammerhead Brake Caliper Rear for 150cc

Caliper comes loaded with brake pads and parking brake armWorks on nearly all 150cc karts, as well as the 150cc UTV by Hammerhead and the 150cc UTV by American SportWorks / GeasonDoes NOT work on Hammerhead GL 150 or Hammerhead Rave 150 Works...

(11) Hammerhead Brake Caliper, Driver (Left) Front for 150cc / 250cc / 300cc, Rear for Mudhead 208R and Mid-Size Gokarts

Driver side brake caliper comes loaded with brake padsThis caliper is also used as rear brake caliper for the 80T and MudHead and Trailmaster Mid XRXWorks on most 150s and 250s   PART#SHammerhead Part # 6.000.028Old TJ Power Sports Part # 6.000...

(10) Hammerhead Hydraulic Brake Hose / Brake Line 75", Rear for 150cc / 208R

75" Rear Brake hose assembly for the rear brakes for most Hammerhead 150cc karts.  Works for most 150cc gokarts out there.Brake hose assembly for 80T / Brake hose assembly for Mudhead / Brake hose assembly for Mid XRX   Part#s Hammerhead Part #...

(09) Hammerhead Hydraulic Brake Hose / Brake Line 34", Left (Driver) for 150cc / 250cc / 300cc

34" Brake Hose used on almost all 150cc and 250cc Hammerhead go karts.  Front brake line 34" long   Part#s Hammerhead Part # 6.000.089Carter Brothers Part # 625-0015American SportWorks part # 14128

(08) Hammerhead Brake Caliper Passenger (Right) Front for 150cc / 250cc / 300cc

Caliper comes loaded with brake padsWorks on most 150cc and 250cc Hammerhead vehiclesMounting bolts are 2 1/2" center to center. Does not come with banjo bolt and washers Hammerhead Part # 6.000.095American SportWorks part # 14152Carter Brothers part #...

(06) Hammerhead M8x14 Allen Head Bolt for Brake Caliper

M8 x 1.25 x 14 allen head bolt / Bolt - Bolt Strap M8*14Allen bolt that is used to hold front brake caliper on to strut. Size: M8 (Metric 8mm diameter) Length: 14mm Thread Pitch: 1.25mm Type: Allen Head Price is per bolt

(05) Hammerhead Hydraulic Brake Hose / Brake Line 43", Right (Passenger) for 150cc / 250cc / 300cc

43" Brake Hose used on almost all 150cc and 250cc Hammerhead go karts

(04) Hammerhead Copper Crush Washer for Brakes

Copper Crush WasherHammerhead part # 13-1422-00

(03) Hammerhead Bolt, M10x24 Fine-Thread Banjo Bolt

m10 x 24 Fine Thread Banjo Bolt, Banjo Brake Bolt Size: M10 (Metric 10mm diameter) Length: 24mm Thread Pitch: 1.25mm Type: Hex Washer Head Price is per bolt BOLT-BANJO,M10X1.25 Hammerhead part # 9.700.004 American Landmaster part # 14460Polaris...

(02) Hammerhead Brake Light Switch, Brake Lamp Switch for 150cc / 250cc / 300cc

Brake light switch assembly for nearly all 150cc and 250cc / 300cc Hammerhead and Trailmaster vehicles.  If your vehicle uses brake master cyclinder (part # 6.000.076) then your vehicle uses this part.  The brake light switch screws directly to...

(01) Hammerhead Brake Master Cylinder for 150cc / 250cc / 300cc

Brake Master Cylinder for both 150cc and 250cc Hammerhead units.  This dual piston master cylinder has been used on the Hammerhead line of karts since 2005.  Works on all of the Hammerhead 150s, EXCEPT the GL150.  Dual Brake Master...

(20) Hammerhead Brake Pedal for 150cc / 250cc / 300cc

Brake Pedal for nearly all Hammerhead 150s and 250s.  Should work for most karts out there.  May come in either black or silver.Hammerhead part # 4.000.015 Carter Bros part # 552.3003American Sportworks Carbide 7150 part # 14115Baja...

(18) Hammerhead M6x24 Spindle Pin / Brake Block Pin

F6 * 24 Pin that connects spindle pin bracket (part # 8.030.024) to brake pedalHammerhead part # 9.700.624American Landmaster part # 14116Carter Brothers part # 500-1042Polaris part # H7660004

(15) Hammerhead Brake Pedal Rubber, Black Pad for 150cc / 250cc / 300cc

Brake Pedal pad for nearly all Hammerhead 150s and 250s.  Should work for most karts out there.  This goes over the brake pedal itself, part # 4.000.015Hammerhead part # 7.020.037Carter Brothers part # 552-3037 / 5523037American SportWorks...

(13) Hammerhead M8x222 Brake Pedal Bolt

m8x1.25x222 Bolt Size: M8 (Metric 10mm diameter) Length: 222mm Thread Pitch: 1.25mm Type: Brake Pedal Price is per bolt Hammerhead part # 9.708.222Polaris part # 205043007Carter Brothers part # 500-2900 / 5002900

(12) Hammerhead Spring, Brake Return Spring for 150cc / 250cc / 300cc

150cc Brake Pedal Return Spring / 250cc Brake Pedal Return SpringWorks for nearly all Hammerhead 150-250cc vehicles and Trailmaster 150cc - 300cc vehiclesHammerhad part # 8.040.007Carter Brothers part # 557-3002American SportWorks part #...

(08) Hammerhead M2x12 Cotter Pin 2 x 12

2 x 12 Cotter Pin for Pin, Figure 17-38Hammerhead part # 9.500.212Carter Bros GSR, GSX 150 part # 500-1003Tomberlin Crossfire Part # 1010647Trailmaster Part # 9.500.212

(07) Hammerhead Bracket, Spindle Pin Bracket / T-Block

T bracket that connects the spindle pins (8.010.081) to brake pedal.  T Block, Brake CAST-COUPLER,BRAKE,PUSH RODHammerhead part # 8.030.024American Sportworks part # 14101Trailmaster Part # 8.030.024,  14101Polaris part # 205043044Polaris part...

(04) Hammerhead Nut, M8 Non-Locking Nut

M8 Nut that works with spindle pin (part # 8.010.081)Hammerhead part # 9.200.008Polaris part # 7547076

(03) Hammerhead Pin, Spindle Pin

Spindle pin that compresses master cylinder plunger Type: Pin/bolt Size: ~50mm length, M8 diameter. Price is per item 14117, pushrod, brake adjust Hammerhead part # 8.010.081American Landmaster part # 14117 Baja Reaction 150 (2-seater model) Part #...

(02) Hammerhead Bolt, M8x35 Flange Bolt

M8 x 1.25 x 35 Bolt that holds brake brake master cylinder to frame (part # 6.000.076) Size: M8 (Metric 8mm diameter) Length: 35mm Thread Pitch: 1.25mm Type: Hex Washer Head Price is per bolt

(01) Hammerhead Bracket, Master Cylinder Protector for 150cc / 250cc / 300cc

Master Cyclinder protection bracket that will help protect the master cylinder on your gokart.Hammerhead part # 8.070.044Polaris part # 303044022