(08) Hammerhead Engine Mount Link Bolt, Chain Tensioning Link

Bolt at the back end of the 150cc engine that adjusts the chain. Used with the engine mounting assembly hardware to adjust the tension of the chain relative to the motor's location.     Hammerhead part # 6.000.026 American Landmaster...

(07) Hammerhead M12 Hex Nut

Size: M12 (Metric 12mm diameter center opening) Thread Pitch: 1.25mm Type: Hex Nut Price is per piece         Hammerhead part # 9.200.012American Landmaster part # 14492Polaris part # 7547345American Landmaster part # 14709

(06) Hammerhead M12 Flat Washer

Flat Washer F12     Hammerhead part # 9.300.012Hammerhead part # M150-1040005Hammerhead part # M150-1003019American Landmaster part # 14690Baja Part # BR150S-430, BR150S-486Baja Part # DN150-279DongFang Part # 1.20.17.65.03001Joyner Viper...

(05) Hammerhead Engine Mount Link Collar

Collar for Engine Mount Link   Hammerhead part # 8.010.041American SportWorks part # 14469Trailmaster part # 8010041080G000Polaris part # 7557002

(04) Hammerhead Engine Mount Link Spacer

Bushing - Enginer Adj Isolator Bushing       Hammerhead part # 8.020.045American Sportworks part # 14713American Sportworks Part # 14468Baja Part # BR150S-127Baja Part # DN150-139Carter Brothers part #  500-3009 Kinroad...

(03) Hammerhead Engine Mount Link

Cushion Engine Mount Link / Engine Adj Isolator Bushing   Hammerhead Part # 7.020.001American SportWorks Part # 14467Kinroad Part # KA003390000Carter Brothers part # 500-3008 Polaris part # 5416112

(02) Hammerhead Chain Adjuster Washer

Engine Mount Link Washer for 150s          Hammerhead part # 8.010.042American Sport Works Part # 14710Trailmaster part # 8010042250G100 Baja Part # BR150S-127Baja Part # DN150-141Carter Brothers part # 500-3007Kinroad Part...

(10) Hammerhead Speed Sensor Bracket

Speed Sensor Mount for 150cc     Hammerhead part # 8.020.197Polaris part # H5260065

(09) Hammerhead Lower Swing Arm With Oil Cooler Mount

Rear Lower Swing Arm for most Hammerhead 150cc kartsRoughly, 22 3/8" center to center     Hammerhead Part # 2.000.042 Hammerhead part # 13-0626-01

(08) Hammerhead M18x37 Swing Arm Collar

Rear Swing Arm Bolt Collar used on many models of 150cc buggies for the mounting hardware for the Upper Rear Swing Arm to the Rear Swing Arm area.     Hammerhead part # 8.010.028Carter Brothers part # 500-5301Trailmaster part #...

(07) Hammerhead Rear Swing Arm Bushing

Rear Swing arm bushing for most 150s and 250s.  These are the rear swing arm bushings that go on the upper portion of the rear, lower swing arm..  For lower swing arm bushings use part # 7.020.008This is also a steering shaft bushing for...

(05) Hammerhead Nitrogen Gas Shock, Rear (Platinum GTS 150)

Rear Gas Shock for Platinum GTS150 with piggyback reservoir for smoother ride.  This rear gas shock will fit nearly all 150cc Hammerhead karts.       Hammerhead part # 6.000.006-GAS  

(05) Hammerhead Rear Shock (GTS 150)

10mm (.4") Mounting Hole 345mm from center to center (or roughly 13.5-13.75 inches)  2-1/2" wide  Trailmaster: 150 XRX and 150 XRS  (Rear Shock) Trailmaster: 150UTV (Rear Shock) Hammerhead Twister 150cc (Rear Shock - 6.000...

(02) Hammerhead Lower Swing Arm Bushing

Rear Swing Arm Bushing for most 150s and 250s.  These are the lower swing arm bushings.  For the upper swing arm bushings use part # 7.010.006       Hammerhead part # 7.020.008 American Landmaster part # 14191Polaris...

(10) Hammerhead Engine Mount Collar

        Hammerhead part # 8.010.025 American Landmaster part # 14177Carter Bros GSR, GSX 150 part #  500-1301 Trailmaster Part # 8.010.025Polaris part # 303044174

(09) Hammerhead M10x195 Flange Bolt

Size: M10 (Metric 10mm diameter) Length: 195mm Thread Pitch: 1.25mm Price is per bolt         Hammerhead part # 9.710.195 Hammerhead part # 9.110.195Polaris part # 7520546

(08) Hammerhead Connecting Rod (Dog Bone) Spacer

Washer Plater         Hammerhead part # 8.020.013 American Landmaster part # 14176Carter Bros part #  528-3001 Trailmaster Part # 8.020.013Polaris part # H5260066

(06) Hammerhead GTS Connecting Rod, Swing Arm Dog Bone

***DOES NOT COME WITH BUSHINGS, PART # 7.010.008, OR GREASE FITTINGS, PART # 9.220.009***     Hammerhead part # 8.030.001 American Landmaster part # 14174Polaris part # 205043045

(05) Hammerhead GTS Bushing, 15x21x10

      Hammerhead part # 7.010.008 Polaris part # 209038012American Landmaster part # 14175

(04) Hammerhead GTS Allen Bolt M8x1.25x16

SEE DAIGRAM IN LINK ABOVE

(02) Hammerhead GTS M12x60 Flange Bolt

Size: M12 (Metric 12mm diameter) Length: 60mm Thread Pitch: 1.25mm Type: Flange Price is per bolt     Hammerhead part # 9.112.060American Landmaster part # 14452

(01) Rear Swing Arm

Rear Upper Swing Arm for most 150cc karts.WILL NOT fit Hammerhead Junior or Hammerhead GL150 or LE 150     Hammerhead part # 2.000.029 Hammerhead part # 2.000.062American Landmaster part# 14173Trailmaster part # 2.000.029

(04) Hammerhead Battery Cushion

Battery Cushion used on all Hammerhead 150s/250s and Mudhead.  Lower battery cushion used on most chinese karts and atv's. Battery "cushion" to help insulate the battery from excessive shaking while driving.   Hammerhead part # 7.020...

(03) Hammerhead Battery Strap

Strap that holds battery cover down on battery.  Works for nearly all models.     Hammerhead part # 7.020.023Old TJ Powersports Part # 7.021.023 Carter Brothers part # 509-3009American SportWorks part # 14187Trailmaster part...