(12) Hammerhead Rear Axle Sprocket 39T

39 Tooth Torque Sprocket / 39 Tooth Axle Sprocket 4 bolt pattern measures 3 1/8" center hole is 2 5/16" outer diameter is 8" Uses #50 chain 5/8 pitch. If you have a 31-32 Tooth Sprocket it is recommended to replace the sprocket to this 39 Tooth...

(11) Hammerhead M8x27 Flange Bolt

m8 x 1.25 x 27 bolt, commonly used for sprocket Size: M8 (Metric 8mm diameter) Length: 27mm Thread Pitch: 1.25mm Type: Hex Washer Head Price is per bolt     Hammerhead part # 9.108.027Carter Brothers part # 500-1027Trailmaster Part # 9.108...

(10) Hammerhead Screw Pan M3x8

Phillip Screw m3 x 8 Screw Pan that holds the magnet (7.050.001) in place Size: M3 (Metric 3mm diameter) Length: 8mm Type: Pan-head Price is per bolt         Hammerhead part # 9.600.308Old Hammerhead part # 9.103.005Old Hammerhead...

(09) Hammerhead Magnet, Speed Sensor

Magnet for speed sensor. The Speed sensor (part # 6.000.268) and screw (part # 9.600.308) are NOT included.   Hammerhead Part # 7.050.001Old TJ Power Sports Part # 7.190.013American SportWorks Part # 14488 

(08) Hammerhead M8x22 Flange Bolt

Bolt, M8 X 1.25 X 22 FHCS DAC Size: M8 (Metric 8mm diameter) Length: 22mm Thread Pitch: 1.25mm Type: Hex Washer Head Price is per bolt     Hammerhead part # 9.108.022American SportWorks part # 14435 Carter Brothers part #...

(07) Hammerhead Axle for 150cc (2018 and Newer)

Rear axle for all 2018 and newer Hammerhead GTS150s and PLATINUM GTS150s with Forward / Neutral / Reverse.  Please check measurements before ordering.  This rear axle does NOT work for the 2017 and older 150cc gokarts...

(06) Hammerhead Brake Disc Rear for 150cc / 250cc / 300cc

This rear disc brake is used on all Hammerhead 150s and 250s Works with most 150cc and 250cc buggies, regardless of vehicle brand Used on all Hammerhead 150cc and 250cc buggies Has a mounting hole for models with a speedometer magnet, but can still be...

(04) Hammerhead Bearing Housing, Rear

This is the housing used to hold the axle bearing to the rear swing arm.  Two housings are used per rear swingarm with one housing for each side of unit.     Hammerhead part # 8.030.008Hammerhead part # 8.030.033American SportWorks...

(03) Hammerhead Bearing 6206-Z Rear Axle Bearing

Rear axle bearing for both the 150cc and 250cc Hammerhead vehicles.   OD: 52mm ID: 26mm Thickness: 16mm Sealed Bearing 6206-2RZ     Hammerhead part # 9.030.006Hammerhead part # 010-62062-01Hammerhead Part # 9.030.006Old TJ Power Sports...

(02) Hammerhead Cover, Bearing Housing Base

Flange Bearing Cover for 150cc that replaces part # 8.020.028 on 2018 and newer 150ccBearing Base Cover for rear axle bearings on 150cc swingarm fo 2018 and newer GTS / Platinum models.   Hammerhead part # 13-1519-01

(16) Hammerhead Upper Chain Guard Bracket

Bracket for the rear engine mount   Hammerhead part # 14480Polaris part # H1020057

(13) Hammerhead Drive Sprocket Keeper

Locking ring that bolts to drive sprocket on engine side   Hammerhead part # 14218American SportWorks part # 14218 Polaris part # 7710855

(12) Hammerhead Sprocket 16T

16 Tooth Engine Drive Sprocket for most 150s that have F/N/R including Trailmaster and American SportWorks50P / 16T  Sprocket-Drive,50P,16T Hammerhead part # 14217American SportWorks part # 14217 Polaris part # 3222266

(10) Hammerhead Engine Mount Bolt Plate Collar / Spacer

Collar for Engine mount plate / Engine Mounting Link Spacer   Hammerhead part # 8.010.076Carter Brothers part #  500-3013 Trailmaster Part # 8.010.076

(09) Hammerhead M10x45 Hex Head Bolt

M10 x 1.25 x 45 Bolt Size: M10 (Metric 10mm diameter) Length: 45mm Thread Pitch: 1.25mm Type: Hex Washer Head Price is per bolt         Hammerhead part # 9.110.045Baja Reaction 150 (2-seater model) Part # BR150S-151Baja...

(08) Hammerhead Engine Mount Link Bolt, Chain Tensioning Link

Bolt at the back end of the 150cc engine that adjusts the chain. Used with the engine mounting assembly hardware to adjust the tension of the chain relative to the motor's location.     Hammerhead part # 6.000.026 American Landmaster...

(07) Hammerhead M12 Hex Nut

Size: M12 (Metric 12mm diameter center opening) Thread Pitch: 1.25mm Type: Hex Nut Price is per piece         Hammerhead part # 9.200.012American Landmaster part # 14492Polaris part # 7547345American Landmaster part # 14709

(06) Hammerhead M12 Flat Washer

Flat Washer F12     Hammerhead part # 9.300.012Hammerhead part # M150-1040005Hammerhead part # M150-1003019American Landmaster part # 14690Baja Part # BR150S-430, BR150S-486Baja Part # DN150-279DongFang Part # 1.20.17.65.03001Joyner Viper...

(05) Hammerhead Engine Mount Link Collar

Collar for Engine Mount Link   Hammerhead part # 8.010.041American SportWorks part # 14469Trailmaster part # 8010041080G000Polaris part # 7557002

(04) Hammerhead Engine Mount Link Spacer

Bushing - Enginer Adj Isolator Bushing       Hammerhead part # 8.020.045American Sportworks part # 14713American Sportworks Part # 14468Baja Part # BR150S-127Baja Part # DN150-139Carter Brothers part #  500-3009 Kinroad...

(03) Hammerhead Engine Mount Link

Cushion Engine Mount Link / Engine Adj Isolator Bushing   Hammerhead Part # 7.020.001American SportWorks Part # 14467Kinroad Part # KA003390000Carter Brothers part # 500-3008 Polaris part # 5416112

(02) Hammerhead Chain Adjuster Washer

Engine Mount Link Washer for 150s          Hammerhead part # 8.010.042American Sport Works Part # 14710Trailmaster part # 8010042250G100 Baja Part # BR150S-127Baja Part # DN150-141Carter Brothers part # 500-3007Kinroad Part...

(10) Hammerhead Speed Sensor Bracket

Speed Sensor Mount for 150cc     Hammerhead part # 8.020.197Polaris part # H5260065

(09) Hammerhead Lower Swing Arm With Oil Cooler Mount

Rear Lower Swing Arm for most Hammerhead 150cc kartsRoughly, 22 3/8" center to center     Hammerhead Part # 2.000.042 Hammerhead part # 13-0626-01