Hammerhead By Polaris

(04) Hammerhead Copper Crush Washer for Brakes

Copper Crush WasherHammerhead part # 13-1422-00

(03) Hammerhead Bolt, M10x24 Fine-Thread Banjo Bolt

m10 x 24 Fine Thread Banjo Bolt, Banjo Brake Bolt Size: M10 (Metric 10mm diameter) Length: 24mm Thread Pitch: 1.25mm Type: Hex Washer Head Price is per bolt BOLT-BANJO,M10X1.25 Hammerhead part # 9...

(02) Hammerhead Brake Light Switch, Brake Lamp Switch for 150cc / 250cc / 300cc

Brake light switch assembly for nearly all 150cc and 250cc / 300cc Hammerhead and Trailmaster vehicles.  If your vehicle uses brake master cyclinder (part # 6.000.076) then your vehicle uses...

(01) Hammerhead Brake Master Cylinder for 150cc / 250cc / 300cc

Brake Master Cylinder for both 150cc and 250cc Hammerhead units.  This dual piston master cylinder has been used on the Hammerhead line of karts since 2005.  Works on all of the Hammerhead...

(20) Hammerhead Brake Pedal for 150cc / 250cc / 300cc

Brake Pedal for nearly all Hammerhead 150s and 250s.  Should work for most karts out there.  May come in either black or silver.Hammerhead part # 4.000.015 Carter Bros part # 552...

(18) Hammerhead M6x24 Spindle Pin / Brake Block Pin

F6 * 24 Pin that connects spindle pin bracket (part # 8.030.024) to brake pedalHammerhead part # 9.700.624American Landmaster part # 14116Carter Brothers part # 500-1042Polaris part # H7660004

(15) Hammerhead Brake Pedal Rubber, Black Pad for 150cc / 250cc / 300cc

Brake Pedal pad for nearly all Hammerhead 150s and 250s.  Should work for most karts out there.  This goes over the brake pedal itself, part # 4.000.015Hammerhead part # 7.020...

(13) Hammerhead M8x222 Brake Pedal Bolt

m8x1.25x222 Bolt Size: M8 (Metric 10mm diameter) Length: 222mm Thread Pitch: 1.25mm Type: Brake Pedal Price is per bolt Hammerhead part # 9.708.222Polaris part # 205043007Carter Brothers part...

(12) Hammerhead Spring, Brake Return Spring for 150cc / 250cc / 300cc

150cc Brake Pedal Return Spring / 250cc Brake Pedal Return SpringWorks for nearly all Hammerhead 150-250cc vehicles and Trailmaster 150cc - 300cc vehiclesHammerhad part # 8.040.007Carter Brothers...

(08) Hammerhead M2x12 Cotter Pin 2 x 12

2 x 12 Cotter Pin for Pin, Figure 17-38Hammerhead part # 9.500.212Carter Bros GSR, GSX 150 part # 500-1003Tomberlin Crossfire Part # 1010647Trailmaster Part # 9.500.212

(07) Hammerhead Bracket, Spindle Pin Bracket / T-Block

T bracket that connects the spindle pins (8.010.081) to brake pedal.  T Block, Brake CAST-COUPLER,BRAKE,PUSH RODHammerhead part # 8.030.024American Sportworks part # 14101Trailmaster Part # 8...

(04) Hammerhead Nut, M8 Non-Locking Nut

M8 Nut that works with spindle pin (part # 8.010.081)Hammerhead part # 9.200.008Polaris part # 7547076