Hammerhead By Polaris

(02) Hammerhead Dust Cover, Fan Isolation Mesh for 150cc, GY6

Dust cover for 150cc that is part of fan and shroud assy.Hammerhead part # 8.020.179American Landmaster part # 14541Trailmaster part # 152.05.002Hammerhead part # 157A.12.305

(01) Hammerhead Fan Cover, Cooling Fan Cover for 150cc, GY6

150cc Cooling Fan CoverHammerhead part # M150-1009410 American Landmaster part # 14540Trailmaster part # 152.05.00Carter Brothers part # 513-1043

(06) Hammerhead Bolt, M5x12 Hex Bolt

m5x12 Bolt Size: M5 (Metric 5mm diameter) Length: 12mm Thread Pitch: .75mm Type: Hex Price is per bolt Hammerhead part # 9.100.512Hammerhead part # 92101-05012-OHAmerican Landmater part #...

(05) Hammerhead Nut, M12 Locking Flange Nut

Locking Flange Nut M12. Size: M12 (Metric 12mm diameter center opening) Height: ~7mm Thread Pitch: 1.25mm Price is per piece Multiple uses for this nut so this will cross reference for different...

(04) Hammerhead Stator and Pickup, 8-Post for 150cc, GY6

This eight-post 150cc stator is the newest and ONLY Hammerhead Off-Road stator currently available. This stator replaces the six-post stator, but does NOT come with the flywheel.  This stator is...

(03) Hammerhead Flywheel for 150cc, GY6

150cc Flywheel that is used on all hammerhead, trail master, carter and american sportworks 150cc models with 8 post stator, will not work on 6 post stators.If replacing the older-style 6...

(01) Hammerhead Fan for 150cc, GY6

150cc Cooling FanHammerhead part # M150-1051100-3Polaris part # 3050092American SportWorks part # 14367

(07) Hammerhead Bolt, M6x16 Flange Bolt

150cc starter motor bolt m6x16bolt flange m6x16 Size: M6 (Metric 6mm diameter) Length: 16mm Thread Pitch: 1mm Price is per bolt m6x16 Flange BoltCommonly used for 150cc starter motorHammerhead part...

(06) Hammerhead Nut, M22x1 Spanner Left-Hand (Reverse) Thread Nut for 150cc, GY6

GY6 Starter Clutch NutLock Nut for the crankshaft area for GY6 150cc buggies, scooters and ATVs Type: Round Lock Nut (Spanner Nut) Size: M22 (22mm ID) Thread Pitch: 1mm Price is per item Hammerhead...

(05/20) Hammerhead Washer, M22x31x2.5 Flat Washer

Flat Washer M22 x 31 x 2.5 Flat / Adjust Washer 25Hammerhead Part # 14511Trailmaster part # 157F.10.437Hammerhead part # M150-1004013

(03) Hammerhead Shaft, Starter Reduction Shaft / Rod for 150cc, GY6

Shaft Starter Reduction Gear for GY6 150ccHammerhead part # M150-1060002Baja Part # BR150S-496Baja Part # DN150-310DongFang Part # 1.20.18.01.02000Joyner Part # GY150-307-0131Carter Brothers...

(04) Hammerhead Starter Clutch, Flange for 150cc, GY6

This Starter clutch works with all Hammerhead 150s and most 150cc out on the marketAlso, it is recommended to replace crankcase cover gasket (part # m150-1003013).Hammerhead Part #...

(02/03) Hammerhead Gear, Starter Reduction Gear for 150cc, GY6

GY6 150cc, Starter Reduction GearHammerhead part # m150-1060003American Sportworks Part # 14371Baja Part # BR150S-497Baja Part # DN150-309DongFang Part # 1.20.18.01.03000Joyner Part #...

(01) Hammerhead Starter Motor 12V, Electric for 150cc, GY6

This starter motor works on every 150cc Hammerhead, including the 150cc Rancher LT.   This 150cc starter motor assembly should work on just about all 150cc go-karts inlcuding 150cc...

(15) Hammerhead Bolt, M6x110 Flange Bolt

M6 x 110 Flange Bolt Size: M6 (Metric 6mm diameter) Length: 110mm Thread Pitch: 1mm Type: Flanged Price is per bolt Hammerhead part # M150-1003008American Sportworks part # 14339Joyner Part #...

(14) Hammerhead Bolt, M6x28 Flange Bolt

M6 x 95 Crankcase Bolt Size: M6 (Metric 6mm diameter) Length: 95mm Thread Pitch: 1mm Type: Flanged Price is per bolt Hammerhead part # M150-1003012American Sportworks part # 14337Joyner Viper 150...

(13) Hammerhead Bolt, M6x28 Flange Bolt

M6 * 28 Flange Bolt Size: M6 (Metric 6mm diameter) Length: 28mm Thread Pitch: 1mm Type: Flanged Price is per bolt Hammerhead part # 152MI-071007 Hammerhead part...

(12) Hammerhead Bolt, M6x35 Flange Bolt

M6 x 35 Flange BoltUsed for the F/R Belt CoverHammerhead part # M150-1003034Hammerhead part # M150-1003009Hammerhead part # 9.100.635Hammerhead part # 9.106.035Hammerhead part...

(11) Hammerhead O-Ring 18x3 for Oil Dipstick

250cc Oil Dipstick O-Ring / 150cc Oil Dipstick O-RingHammerhead Part # M150-1003307Hammerhead part # 172MM-013030 Trailmaster part # 152.12.108American Landmaster part # 14335

(10) Hammerhead O-Ring 30.8x3 for 150cc, GY6

O-Ring 30.8 x 3 used on all 150cc as the O-Ring gasket for the oil drain plug Size: Φ30.8mm (Metric 30.8mm diameter center opening) Thickness: 3mm Type: O-Ring Price is per...

(07) Hammerhead Clamp, AC Generator Clamp for 150cc, GY6

AC Generator Cord ClampHammerhead part # m150-1003006American Sportworks part # 14332Trailmaster part # 152.11.508

(06) Hammerhead Oil Dip Stick for 150cc, GY6

Plastic oil dipstick for checking engine oil levels.  This dipstick works for nearly all 150cc vehicles. DIP STICK-TRANSMISSION,150Hammerhead part # M150-1003105Carter Brothers part # 513-1021 /...

(05) Hammerhead Cap, Oil Drain Cap for 150cc, GY6

Oil drain cap for 150cc vehicles / Oil Screen Screw plug for 150ccHammerhead part # M150-1003104American SportWorks part # 14328Trailmaster part # 152.09.002

(04) Hammerhead Spring, Oil Filter Screen Spring for 150cc, GY6

Oil Filter Spring for 150cc vehicles / Oil Screen SpringHammerhead part # M150-1003102American SportWorks part # 14330Trailmaster part # 152.09.004

(03) Hammerhead Oil Filter Screen for 150cc, GY6

150cc Oil Filter Screen / 150cc Oil Screen  OIL FILTER SCREEN Hammerhead Part # m150-1003120American SportWorks part # 14329Trailmaster part # 152.09.003-OSPolaris part # 3050083

(02) Hammerhead Crankcase Cover Gasket for 150cc, GY6

Crankcase cover gasket is needed when replacing the starter clutch (part # M150-1060001) Starter Clutch Gasket Outer Crankcase gasket Hammerhead Part # M150-1003013 American SportWorks part #...

(01) Hammerhead Crankcase Cover, Outer for 150cc, GY6

150cc Crankcase cover, outer crankcase RH 150ccRight Crankcase Cover used in most all vehicles that have a GY6 150cc engine.Hammerhead part # M150-1003101 Hammerhead part #...

(29/02) Hammerhead Bolt, M6x18 Flange Bolt

This M6x18 Flanged Bolt is most often found on many buggies and scooters near the Magneto Stator area. It can also be found in the Cylinder Body area of CN250 and CF250 engines, used to secure the...

(28/09/05) Hammerhead Pin, M8x14 Dowel Pin for 150cc, GY6

8 x 14 Dowel Pin Size: M8 (Metric 8mm diameter center opening) Height: 14mm Type: Dowel Pin Hammerhead Part # M150-1003005American Landmaster part # 50016

(27) Hammerhead Bolt, M8x195.5 Stud Bolt for 150cc, GY6

M8 x 195.5 Stud Bolt for Cylinder Size: M8 (Metric 8mm diameter) Length: 195.5mm Thread Pitch: 1.25mm Type: Stud Price is per bolt Hammerhead part # M150-1003002American Sportworks Part #...

(26) Hammerhead Bolt, M8x187.5 Stud Bolt for 150cc, GY6

M8 x 187.5 Stud Bolt for Cylinder  Size: M8 (Metric 8mm diameter) Length: 187.5mm Thread Pitch: 1.25mm Type: Stud Price is per bolt Hammerhead part # M150-1003001 American Sportworks Part...

(25) Hammerhead Damping Bushing / Engine Hanger Bushing, Rubber for 150cc, GY6

This engine mount bushing is for a GY6 125-150cc engine.  GY6 Crankcase Front Engine Mount Bushing Outer Diameter: 28mm Length: 22mm ID: 10mm Hammerhead part # m150-1003320 American...

(24) Hammerhead Bolt, M6x50 Flange Bolt

M6 x 50 Crankcase Bolt Size: M6 (Metric 6mm diameter) Length: 50mm Thread Pitch: 1mm Type: Flanged Price is per bolt Hammerhead part # M150-1003032Hammerhead part # 152MI-013010American Landmaster...

(23) Hammerhead Bolt, M6x12 Flange Bolt

M6 x 12 bolt - flange bolt Size: M6 (Metric 6mm diameter) Length: 12mm Thread Pitch: 1mm Type: Flanged head Price is per bolt SCR-HXFL-M6X1.0X12 8.8 ZOD P30 Hammerhead Part # 9.106...

(22) Hammerhead Washer, M6 Flat Washer

Flat Washer 66mm is the diameter of the center openingHammerhead part # 9.300.006Hammerhead part # CF188-065206American Landmaster part # 14315

(21) Hammerhead Ball Bearing 6202

E6202 Radial Ball Bearing BALL BEARING 6202 Hammerhead part # 91004-E6202-KAT Hammerhead part # Y00055Trailmaster part # GB/T276 6202 American Landmaster part # 14149Polaris part # 3050324

(15/20) Hammerhead Ball Bearing 6204

E6204 Radial Ball Bearing BALL BEARING 6204Hammerhead part # 91004-E6204-KAT Hammerhead part # 82407Trailmaster part # GB/T276 6204  Polaris part # 3050323

(19) Hammerhead Ball Bearing 6203

E6203 Radial Ball Bearing BALL BEARING 6203 Hammerhead part # 91004-E6203-KAT American SportWorks part # 50102Trailmaster part # GB/T276 6203Polaris part # 3050322

(18) Hammerhead Shift Detent Ball for 150cc with F/N/R

Ball, Shift Indent / STEEL BALL Φ9.5Hammerhead part # 14309Trailmaster part # GB/T308 09.5Polaris part # 3050035

(17) Hammerhead Spring, Shift Indent Spring for 150cc with F/N/R

Spring for 150cc F/N/R transmissionShifting Drum Positioning SpringHammerhead part # 14310Trailmaster part # 157F.10.410Polaris part # 3050034